Jump to content
SAU Community

Recommended Posts

jizza saw your lady gaga thing on facebook not bad mate, is that your girlfriend singing?

Yeah, we just did it for shits and giggles :worship: Might do a few with my own vocals some time. Kids like Justin Bieber need to stop hogging all the views on youtube lol

Honestly you guys have the talent, just get your name out there like Short Stack they started off the same way, using internet radio and youtube now they're huge and chick magnets.

Make a youtube series or something get your name out there!

yes, but worth every penny.... no other processor will withstand what i put my robo through

true that!

we have a robotcoupe gold series planetary mixer

love that thing

was like christmas when i walked in and saw it sitting there

what are your thoughts on the fridges, skope, williams etc

Thanks for the support guys :(

jizzy did you enter that google talent search? get your shit out there bros.

Never heard of it. Link me up and I'll consider it. Would definitely need a better vid though. That's just us sitting behind a webcam and making up shit on the spot :) Might actually sound half decent with a properly planned recording.

jizzy if shan isnt even flaming you, you must be good! :)

nah but his right, get your name out there, hell go on today tonight if you have to

Yeah, it's probably the only thing he doesn't flame me about! :(

I am trying to get my name (or rather my band's name) out there as much as I can.

We've got over 600 fans on facebook without even playing a gig :( But I would like to make that 5000+ before I release the EP. That shit cost me $3000+ to produce.

he does look like a emo tranny christian rock group member though.

LOL. Wtf does that look like?

What kind of muzza plays guitar and shit? :P I guess you're talking about the hair yeah?
hair, facial hair, crucifix, tight white t shirt..
i actually like his music, no homo.

he does look like a emo tranny christian rock group member though.

:D

But Jezz does write some decent music.

Jamie - Saw the GTR at Werribee Plaza around the corner from my Work... What you doing in the West? lol

Hey man!

Yeah I was there, I was meeting a friend to get my new HDD.

Where do you work?

Westside brings back memories as I use to live in Point Cook :D

Never heard of it. Link me up and I'll consider it. Would definitely need a better vid though. That's just us sitting behind a webcam and making up shit on the spot :D Might actually sound half decent with a properly planned recording.

http://youtube-global.blogspot.com/2010/10...-worldwide.html

gentlementlemen...

just gave a counter offer on:

1976-Nissan-Fairlady-Z_1.jpg

http://www.j-spec.com.au/featured/fairlady-z-11157.html

FUCK YEAH

Seller came back with a offer that was good enough to accept. just putting some last minute vice clamps on his nuts to squeeze a better price.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...