Jump to content
SAU Community

Recommended Posts

A few, at funerals and shit :P Would be even easier if I didn't know the person. I'm just not really phased by death etc. like normal people are. It's just a fact of life in my eyes.

In other news... FUUUUUUUU my bodykit got damaged in storage. Better hope fiberglassing can fix that shit.

im a stonemason and yet to touch a dead body so far, you got some problems dude :D

although death doesnt phase me either, just puts life into perspective more

What year? I applied for their architecture course and had to do that wierd test thingy in Swanston St in late 2001. Didn't get in, so ever since, I've been a sparky :P

In a way I kind of want to do a bit of tertiary study for some better coinage, but no idea what, and most things probably wouldn't pay as well as what I am doing now. I'll possibly just teach myself some PLC programming, as there is some big bucks to be had in that.

2006 for me. I never showed up for the interview lol. Aaah well, one day i'll figure out what I want to do with my life lol.

how many dead bodies have you touched?

icwatyoudidthere

LOL

ignitor arrived, put it in. some improvement overall but still dead in cylinder 1

gonna get my loom checked out tomorrow, if its fine. ill move onto injectors

Nice one, I had a Trust DD back when I had a skyline

dd_Muff340.jpg

hmm thats quite sexy. would yo get away with driving that on the street?

and jez im just asking because seeing someone laid out in a casket barely counts, cos they are cleaned and perfumed and have make up etc on to make em look nice for the family. hamish is gonna have to put up with worse than that. good on ya hamish, there can never be too many paramedics. is mez for or against you getting into the health industry? curious to find out where she stands lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...