Jump to content
SAU Community

Recommended Posts

RA to the muddaf*kkin D

how the f**k is it legal tho?

i'm guessing EPA compliant "stock" engine still won't = engineerable in a 240z chassis

gimme ride when it gets here kthnx

yeah i have.. but it's just like every other white r33 out there (like yours haha)... it's quick but i want it to look better.

thinking stealth wing and coilovers should keep me happy for a while

carbon. nuff sed

paint it orange

nearly lost my shit at that one

car bra any good for temp use on the car when driving on the freeway.....thinking of getting one made up (going to b for dirt cheap thnx to mates contacts)...just want to avoid shit hitting the intercooler and bending the vents...getting a mesh on the intercooler was an option but not much room between the front bar and the intercooler...:(

any advice for me? :D

talk to shanusr33. the full show spec white r33. he's got a custom one he uses on all the cruises. they are surprisingly exxy unless u got hookups. also be warnded: they will rape your paint if the underside surfaces aren't absolutely clean. basically a dirty car/carbra becomes sandpaper powered by the wind. also if the clasps come off, scratchy scratchy.

she'll be right though

chipping in the extra on top of insurance cover to get new wheels.

Ordering them officially tomorrow hopefully, subject to availability

yay new wheels!

... Who wants 3 advans?

Im past epping, just out of wallan.... so like 30mins from northern burbs

Incredible, I saw you today in your yellow evo pulling out of the united servo in Wallan. Would have been around 3:30-4:00? Couldn't believe it lol.

I really like the look of advan tri spokes, even though nobody else really does lol. In fact, i'm going to be spraying the ones I have in my garage this weekend.

In other news, looks like my diff has turned into a single spinner.

There's a white 33 GTR on here that has em, with nice dish and in black...that's the only time I've rated em

Yeah, unfortunately mine are in a really weak offset. But I'm going overseas soon so i'm not gonna bother buying more wheels.

Spray black maybe?

21962_352520245916_731930916_4783193_6330932_n.jpg

There's only two ways to make trispoke advans look good... hide the spokes by painting it black and pulling focus to the lip:

240SX-Advan.jpg

or let your nuts hang out in people's faces and show em you don't care that they're hating on trispokes by painting em a bright fluoro colour:

AdvanEndless.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...