Jump to content
SAU Community

Recommended Posts

Connect a justjap / autobarnz / ebay can between the cam breather and intake pipe.

I made the hoses long to reduce the speed of the air so it wasn't just going to suck oil vapor straight out of the pipe. As there are

no baffles in these cans.

post-59171-0-65640500-1301624051_thumb.jpg

Im a bit confused by this pic mate, i couldnt see it properly on my phone but im home in big screen full hd now.

1. your catch tank is on its side which means if it was catching oil it would drain back down the line anyway

2. your radiator is croooked

Is this car smashed or something

Anyway heres where I ended up mounting mine..

post-65674-0-25300200-1301644349_thumb.jpgpost-65674-0-52665300-1301644387_thumb.jpg

Yes and dont forget somewhat powerful...heard a few stories of people that USED to work there..

Nobody messes with daddys little girl :laugh:

Sounds like you had quite an in-depth conversation with her...were you tuning her or something?

Yours?

It had a good life, it was certainly it's time.

Ah I love April fools. Don't you worry my motor is still smacking the limiter as hard as anything. You and Mohsen got sucked in LOL. Dw Mohsen actually messages me asking haha

Ah I love April fools. Don't you worry my motor is still smacking the limiter as hard as anything. You and Mohsen got sucked in LOL. Dw Mohsen actually messages me asking haha

only because i got worried :wub:

expecting a ride on the dyno day :P

Ah I love April fools. Don't you worry my motor is still smacking the limiter as hard as anything. You and Mohsen got sucked in LOL. Dw Mohsen actually messages me asking haha

normal people don't make April fools day pranks after noon.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...