Jump to content
SAU Community

Recommended Posts

Fuck fried chicken, it's all about grilled tenderloins from Nandos in Boronia. You won't go back to fried chicken after that.

bacon.

$200 of chocolate in bacon.

actually. save the block for SAU mountain retreat. Melt it down, combine with bacon and consume with alcohol.

This. Next SAU bulla cruise - we'll finish it off.

http://www.popeyes.com/

something like that would be nice.

Fuck that looks great!

Charcoal Chicken next to the Melbourne Show Grounds I know has fried chicken and is the other alternative to KFC.

f**k fried chicken, it's all about grilled tenderloins from Nandos in Boronia. You won't go back to fried chicken after that.

This. Next SAU bulla cruise - we'll finish it off.

Yeah right... $8+ for 4 little pieces of chicken meat...

KFC is good when cooked fresh, cuz their chicken can stink sometimes.

that's the problem i have with KFC here, the oil is pretty dodgy as well sometimes, and sometimes they cook too many at once, some parts aren't fried properly

that's the problem i have with KFC here, the oil is pretty dodgy as well sometimes, and sometimes they cook too many at once, some parts aren't fried properly

You don't want to try the "Emergency Stock" then :laugh:

Yeah drenched in oil and just becomes too soggy with no crisp to it.

That's why you get Wicked Wings / Zingers.

:)

the zinger here uses breast meat instead of thigh meat, dry, powdery, no fat content at all.

but wicked wings on the other hand, ahh i might go get some later.

Yeah!

I'ma hungry now too :D

Lol, i've had that, no, i want fried chicken today!

From Boronia Nandos?

Fuck that looks great!

Charcoal Chicken next to the Melbourne Show Grounds I know has fried chicken and is the other alternative to KFC.

Yeah right... $8+ for 4 little pieces of chicken meat...

Not from Boronia Nandos...I've had Nandos elsewhere and nothing compares. $15 and you'll end up with a tenderloins meal, decent sized strips that fill you up about as much as a regular sized restaurant parma + plate filled up with the best chips ever + powerade. When you consider that any decent large meal from KFC and co costs you $10-12 these days, it's not that bad. There was a time when I was having them 3 times a week lol. I've since cut down to 1, but I never get sick of it. It's quality chicken too, you can't hide shit chicken when you grill it.

Yup. I'll take you there friend, it won't let you down :)

Seriously on a "give me the regular" basis with the staff lol. Bad location putting it right near my gymnasium :(

From Boronia Nandos?

Not from Boronia Nandos...I've had Nandos elsewhere and nothing compares. $15 and you'll end up with a tenderloins meal, decent sized strips that fill you up about as much as a regular sized restaurant parma + plate filled up with the best chips ever + powerade. When you consider that any decent large meal from KFC and co costs you $10-12 these days, it's not that bad. There was a time when I was having them 3 times a week lol. I've since cut down to 1, but I never get sick of it. It's quality chicken too, you can't hide shit chicken when you grill it.

For Nandos, I go the Classic Chicken Burger or Classic Double Chicken Burger with bacon + egg + cheese / Chips and Drink + a serve of 8 BBQ Ribs.

WIN!

:D

Yeah we've got popeyes in singapore, that's a little exy but its a perfect alternative to KFC, will check out that one near melbourne showgrounds soon..

bah shouldve asked you where to eat in singapore before i went there lol

the zinger here uses breast meat instead of thigh meat, dry, powdery, no fat content at all.

but wicked wings on the other hand, ahh i might go get some later.

the maccas in singapore is awesome the spicy tendercrisp burger uses a thigh fillet and it was awesome, heaps better than any maccas in australia

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...