Jump to content
SAU Community

Recommended Posts

i think i spotted you on dalton road yesterday, i was in the territory, rd p plates and personal plates

Yep, would have been me if it was around 2-3ish. My '33 has black wheels now. Was coming home from the parental's house in Preston. Temperature was so hot that me and the old man left work early for the day.

Didn't see you dude : (

$200 and you get 2nd one for free, alternatively, make an reasonable offer and you still get 2nd one for free.

haha ill take the 2nd one for my rb20dett O_o

Does it come with the holding bracket?

On another note; This is pretty cool if you want to free up space.

MiddleConsole.jpg

haha ill take the 2nd one for my rb20dett O_o

Does it come with the holding bracket?

On another note; This is pretty cool if you want to free up space.

MiddleConsole.jpg

Yes both actuators does have holding brackets.

I actually thinking of buying this console so I can grab aftermarket gauges and place them on centre console and replace my a/c and heater panel which is semi-working.

Has anybody had any success using injector cleaner in the past?

I'm trying to eliminate a bit of a rough idle. Car has new coil packs but still isn't 100% on idle, especially when cold.

280rwkw. Everything hidden. Been pulled over atleast 5 times since it was built and Bonnet popped. Cop never found a thing :)

What turbo is it currently strapping to side of the 25?

Nope -7 and -9 (aka GT-SS) aren't the same, slighty different compressor wheel. -9 without EBC spools nice and early than -7 with EBC.

I wonder what would happen if I whacked EBC in my old 33 GTR and have it set up aggressively, I'd never know.

Yeah, the specs are not that far off from each other, but yeah I see where you are coming from.

280rwkw. Everything hidden. Been pulled over atleast 5 times since it was built and Bonnet popped. Cop never found a thing :)

Try living in Knox/Rowville area where Pettit advises all the Highway patrol people on what to look for ~_~

edit: didnt you get an EPA as soon as you got the car tuned?

Yes both actuators does have holding brackets.

I actually thinking of buying this console so I can grab aftermarket gauges and place them on centre console and replace my a/c and heater panel which is semi-working.

whats the issue? Always stuck on blowing hot air?

whats the issue? Always stuck on blowing hot air?

Ambident temp won't stay on, a/c was working fine until some twat took the gas out to replace the heater system, etc...

So tempted to set it on fire.

Try living in Knox/Rowville area where Pettit advises all the Highway patrol people on what to look for ~_~

edit: didnt you get an EPA as soon as you got the car tuned?

That EPA was when I got pulled over before the car was built. Sent it in to get built and it was almost finished then got EPA in mail. Was costly but did have a atmo

Bov and 2 intakes n shit. Not anymore

Feel sorry for you Knox boys

Ambident temp won't stay on, a/c was working fine until some twat took the gas out to replace the heater system, etc...

So tempted to set it on fire.

AMB Temps only show for a few seconds and then turn off (in R32's).

Get the A/C re-gassed.

AMB Temps only show for a few seconds and then turn off (in R32's).

Get the A/C re-gassed.

What useless piece of junk.

Still saying I shouldv'e bought a R33...

What useless piece of junk.

Still saying I shouldv'e bought a R33...

LOL!

Are you going to be staring at the AMB Temps as you drive..?

It's just to give an indication of how cold / hot it is outside...

^^ Yep!

haha why would you need to know the temperature every second? :P

Cuz Grant complains about stupid shit :rofl:

Grant don't worry about it!

You complain about your R33 and now your R32, just sell it and by a R34 GTR :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...