Jump to content
SAU Community

Recommended Posts

Isnt this turning out a little excessive for sub 400kw?

I wonder why it needs so much flow, le hmm.

Sorry mate

Didn't realize I was spending your money,

Flow is no longer in question Jez have spoken with e85 guys and they believe it's related to the fuel heating up to much second pump is to help with said issue

I think what he meant by excessive was its seems odd that your fuel system isnt coping as well as others have, I dont think he was talking about cost.

Eg some people are getting enough fuel flowing to make around 360kw on e85 using a single 044 intank with standard fuel lines and you are having to add a surge tank, bigger lines and another fuel pump. Granted I dont think they are going to be putting out quite as much power as you when your tune is finished and they werent running as much boost, but still.

Edited by Mitcho_7

Sorry mate

Didn't realize I was spending your money,

Flow is no longer in question Jez have spoken with e85 guys and they believe it's related to the fuel heating up to much second pump is to help with said issue

Sorry WHAT?

Dont be so defensive like im mocking your hard earnt layout. Good luck to you, I hope your stuff turns out well, I message Jez on the regular and get updates on how your cars coming along. The way you replied to that is almost offensive.

Mitch above is on the money. Im simply curious as to why its needing so much flow, and in a perfect world that could have lead to discussion about what other people have flowed with what setup. Who knows, maybe a few great minds would have joined in and helped troubleshoot so you can find out whats going on.

Spending my money, pff.

I think what he meant by excessive was its seems odd that your fuel system isnt coping as well as others have, I dont think he was talking about cost.

Eg some people are getting enough fuel flowing to make around 360kw on e85 using a single 044 intank with standard fuel lines and you are having to add a surge tank, bigger lines and another fuel pump. Granted I dont think they are going to be putting out quite as much power as you when your tune is finished and they werent running as much boost, but still.

:no:

360kw with single pump is the limit.... Well 357 was the final SAFE number anyway

Standard fuel lines were all over and done with above 340ish.... I had to go bigger lines and modify the fuel tank hat...

:no:

360kw with single pump is the limit.... Well 357 was the final SAFE number anyway

Standard fuel lines were all over and done with above 340ish.... I had to go bigger lines and modify the fuel tank hat...

This I was not aware of

Standard fuel lines were all over and done with above 340ish.... I had to go bigger lines and modify the fuel tank hat...

GTR/GT-t = same last time i checked... Wonder how the GTR guys are getting 400rwkw+ through stock lines & E85 (with just a Nismo pump) :unsure:

GTR/GT-t = same last time i checked... Wonder how the GTR guys are getting 400rwkw+ through stock lines & E85 (with just a Nismo pump) :unsure:

I think its a lot to do with the fuel hat itself.... It was a restriction.... Hence the modification :)

355rwkw here on pump98 and single pump no restriction. and 335rwkw on eflex no restriction all stock lines and rail. in gtst.

Well i dont want to go dribbling shit without properly understanding it myself BUT on my car the fuel pressure was unsafe at 360kw, after the mods were done and it was rechecked the fuel pressure was spot on at 357kw so it was obviously a restriction...

GTR/GT-t = same last time i checked... Wonder how the GTR guys are getting 400rwkw+ through stock lines & E85 (with just a Nismo pump) :unsure:

My original post from page 30 said exactly that.

Then I edited it in fear of a flaming :P Thanks for putting it out there though, I knew I wasn't going mad.

GTR/GT-t = same last time i checked... Wonder how the GTR guys are getting 400rwkw+ through stock lines & E85 (with just a Nismo pump) :unsure:

Sydney is warmer than Mexico. We need stuff like 15 litre sumps and 3 fuel pumps. :woot:

Sydney is warmer than Mexico. We need stuff like 15 litre sumps and 3 fuel pumps. :woot:

Hahaha exactly.

Maybe this will make a few people scratch their heads.

9a9959c5.jpg

hehe :)

I'm a bit behind on reading all threads at the moment. Too busy, so i tend to miss post replies where I usually see most even pre-edit :P

Nismo outflows a 044. Im hoping my single walbro 400 will be ok otherwise i will mount a 2nd pump in tank

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...