Jump to content
SAU Community

Recommended Posts

We have a GTR over here that runs on full 100% ethanol. Makes 630rwhp on a roller, gets the pure ethanol very cheap through a limited source.

Almost wouldn't start after sitting at the track on a cold night so not really a great recommendation haha

E100 isn't new, been there done that :)

An R34 with those K's though, never seen one in real life with that many k's on it!

You still haven't, it was a picture :ph34r: hehe

Its a good sign for the other 34's on the road though, shows they are well built!

Kurtis, the suspense is killing me already!

Oh come come now. You Daniels 34, tuned by Status - makes over 400 on E85 with just a Nismo :)

Exactly my point. 044 around 200lph. Nismo 246lph but i cant find specs for flow at higher psi which is where it counts

Well for a while I've suspected the Nismo pump to not be "as much" of an upgrade over a stock GT-R pump as many would believe.

It's simply the cheaper option so hence everyone goes down that road given a stocker is 10yrs old and offensively priced from Nissan

There are some numbers on a stock GT-R pump below (makes for some interesting reading).

http://www.stealth316.com/2-fuelpumpguide.htm

working in the boot of his car paid off today, AFR's are doing exactly what i wanted tonight. Just got back from a drive with it. went down to the servo to top up the $21 worth of EFLEX, racked up some sensible km's, think we are up to 50km just cruising around with a few squirts on 14psi low boost, and only 1 half throttle tyre fryer on high boost, got scared as midnight and tired, had a big day.

Maxed out at 367kw on 22psi, tried more boost with no gain, but very impressed as its all legal in the way of Catalytic converter and wastegate plumbed in, thing is a sleeper.

still got to finish the tune back from E67 down to 98 octane but atleast everything held together :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...