Jump to content
SAU Community

Recommended Posts

As has been said many times before, if you drive sedately like a normal vehicle for the last 1km or so there's no need to let the car idle when you're parked. Just don't thrash the thing before pulling up at your destination and you'll be fine.

okay im looking at getting a 6262 .82a/r Twin scroll with a matching 6boost manifold. Can anyone tell me about their experience with this setup i have not found any results with this turbo on a RB25. Im after getting about 500hp but need some headroom for further plans. iVe noticed a gtr doing this at about 20-24 P.S.I but rb26 and rb25 are a bit different. Any help will be appreciated.

http://www.skylinesaustralia.com/forums/topic/377634-gt35r-or-precision-6265-ballbearing/page__st__20

First post on the page, that guy says good things about it. Maybe PM him to see the housing size?

Thanks bro that's a Gtr though.I've noticed that not a lot of RB25 go with the 6262.what makes it harder is finding one with the twin scroll as I want to find out how much laggy it would be.

Bryce, I know from experience that the 6262 and GT35 are very, very similar in response. There is a back to back comparison from the US here: http://forums.nicoclub.com/highest-horsepower-rb25-stateside-t477938-40.html

Note the 6262 was running a larger housing (Tial) I don't the Tial v-band housings do anything extraordinary at all...

Also, PTE make a .84 T4 divided housing only.

Cheers,

PJ

.

Bryce, I know from experience that the 6262 and GT35 are very, very similar in response. There is a back to back comparison from the US here: http://forums.nicocl...t477938-40.html

Note the 6262 was running a larger housing (Tial) I don't the Tial v-band housings do anything extraordinary at all...

Also, PTE make a .84 T4 divided housing only.

Cheers,

PJ

yh i meant .84

might get the twin wastegate setup if the funds permit but if not will stick to a single W/G

so im set on a 6262 TS .84 aiming for 550hp and some headroom

Took my car for a quick spin today, was getting 1 bar in 3rd at about 4000rpm and just below 4000rpm in 4th.

That was running gate pressure of around 1bar (so not exactly optimal as it would be opening partially before then) and has not been tuned or cam gears played with yet! Pulls fairly well for only 15psi :)

That's a 6262 on a stock RB26 with drop in cams.

So far so good, can't wait to get some results from the dyno

Edited by SimonR32

Scott is right. T4 0.84 divided

I'll check at 3000rpm if I get a chance, it seemed to be ramping fairly quickly at 3500rpm

Whats the rest of the setup? rb26 yeah?

What piping and throttle body are you using? that would make a diff to if its short rb26 plenum runners.

Hey guys, see pics of my PTE 5558 0.63 plumbed up to my R34, injectors and tune coming this Monday, 98 fuel and as high boost as possible. I urged them for a safe 22psi but JEM says they mostly go 20psi on 98 fuel unless its a built engine?

Words of their salesman so I'm sure the tuner will give a slightly different perspective. Well fingers crossed and really hoping to crack 300rwkw - its on stock manifold btw.

Do you guys see issues with the way the pipes run (I think the 3" from pod is a funny angle), the weld quality looks top notch.. ;)

post-49401-0-89425800-1355529357_thumb.jpg

post-49401-0-62122000-1355529375_thumb.jpg

post-49401-0-02081400-1355529386_thumb.jpg

post-49401-0-02748100-1355529403_thumb.jpg

post-49401-0-39796800-1355529416_thumb.jpg

post-49401-0-40799800-1355529431_thumb.jpg

post-49401-0-37277000-1355529440_thumb.jpg

Edited by rondofj

looks good ronny!, be good to see how it goes, My big Pt cleared customs friday..bastards tried to stitch

me up...lol, ended up only paying gst on $1000 and payment for submitting form, so $178 extra...was $600 ish

intially as they tried to to tax me on $2500

cheers

darren

Edited by jet_r31

looks good ronny!, be good to see how it goes, My big Pt cleared customs friday..bastards tried to stitch

me up...lol, ended up only paying gst on $1000 and payment for submitting form, so $178 extra...was $600 ish

intially as they tried to to tax me on $2500

cheers

darren

which one did you get mate? I paid $1050 all up for turbo, 2X silicon joiners for turbo cold side with clamps and incl postage too. I didnt pay any duty haha

.., nah i paid it, because it got sent from a friends house in ohio, and she sent it without asking

and instead of writing nothing about it, the goose put turbo worth $2500 on the postage..customs picked it up straight away

I sent a letter explaining it was a second hand journal bearing 7675 ..that i only paid $1050 dollars for it..lol, and that i can buy them of ebay for $1500 delivered from the u.s

any day of the week, so why would i pay $2500, so they just charged me GSt on $1050..i was happy with that.

cheers

darren

.., nah i paid it, because it got sent from a friends house in ohio, and she sent it without asking

and instead of writing nothing about it, the goose put turbo worth $2500 on the postage..customs picked it up straight away

I sent a letter explaining it was a second hand journal bearing 7675 ..that i only paid $1050 dollars for it..lol, and that i can buy them of ebay for $1500 delivered from the u.s

any day of the week, so why would i pay $2500, so they just charged me GSt on $1050..i was happy with that.

cheers

darren

Lol @goose hahaha cracked me up..I got the seller to put 850 on the sticker so paid nothing in tax

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...