Jump to content
SAU Community

Recommended Posts

I looked around for this information for a while too, and finally when throwing out the shipping box for the turbo found that the information was actually in the box.

Here I was thinking Precision shipped turbos with no information like Garrett do.

There is an inner and outer box, and al the necessary information I needed was between the two. Tear you box apart and you'll probably find it too, along with stickers etc.

If there is one thing the Precision vbands could do to improve their setup, it would be to make the vband positively centre on the housing by machining a matching edge on the housing and flange. Such a simple thing to do, and it greatly improves the seal, load carrying capability and guarantees pipework is centre off the back of the housing.

I thought the same about the vband Ian but I've been playing with it and on mine at least when you tighten the vband it centres perfectly. I would still prefer to see a stepped fit though.

Looking at a 6266 for my 25 neo. What vendor has them at the best price? Best ive found is about $1800 delivered for a t4 divided .84

Try and get a quote from Raw Brokerage (look for Ricky, tell him the RB'd G in Dubai sent you lol). I got the same exact one a few hundred dollars cheaper.

Well looks like we're starting to come close to what the 7175 is capable of in my car, there's a couple more things we'll try first before we possibly switch to something bigger.

Tapped 51psi a couple of runs and with the car trapping 164.5mph and weighing in at 2670lb it's showing around 925hp at the wheels, Precision rate the turbo to 985hp.

http://www.youtube.com/watch?v=xSBivS5qmpc&feature=c4-overview&list=UUCVe2Q-x7n-mDvtT1rrV9cg

This is more of a blog / video of the day, don't think you can view it from a mobile.

http://www.youtube.com/watch?v=zijeh6axvyc

Well looks like we're starting to come close to what the 7175 is capable of in my car, there's a couple more things we'll try first before we possibly switch to something bigger.

Tapped 51psi a couple of runs and with the car trapping 164.5mph and weighing in at 2670lb it's showing around 925hp at the wheels, Precision rate the turbo to 985hp.

http://www.youtube.com/watch?v=xSBivS5qmpc&feature=c4-overview&list=UUCVe2Q-x7n-mDvtT1rrV9cg

This is more of a blog / video of the day, don't think you can view it from a mobile.

http://www.youtube.com/watch?v=zijeh6axvyc

well and truly flowing more than the 985hp they are specifying then. Congrats on the build man

LOL Darren! I don't know what point it will need something special, we'll see if we can squeeze another 5psi out of it.

Then 7675, then 7685, then 8285 all in??..f**k it..just go straight for the Pro-mod..haha

The Precision dude at jambo didn't like it when i asked him when the 80mm turbines are coming back

theres some big holes left from the 7680 and 8280

cheers

darren

Edited by jet_r31

Well, my mate has an 8285 with a .98 housing machined up, it will go straight onto mine, so if I'm going to put a track turbo in, it will be that. I can't even imagine how that would feel on my engine when it comes on....this one hits like a train as it is!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...