Jump to content
SAU Community

Recommended Posts

Seen the overlays as 6262 with give me a extra 1k rpm boost response and I'll be sticking in. Otomoto v cam for even more.

should do the job at the track at 15 psi and will also allow me a "street" high boost for when I go get a coffee on Saturday once a week

  • Like 1

Yea whats the go with the 6062.. any figures yet?

Is it the newest version of the 6262 basically?

Have not seen a result yet, but the 6062 is rated at 750 hp and the 6262 is rated at 705 hp.

What that translates into real works figures, who knows, but it's definately interesting. Smaller front fan but can flow more... Win win!!!!

Finally got the car with new Plazmaman intake manifold and 6870 to the track with an auto though...

9.60@140mph on 21psi

9.39 @ 144mph on 23psi

Turned it up to 40psi and the box doesn't want to play enough to head back to the track but it feels very strong. Hopefully back to the track in a month on 50psi.

Edited by PJ.
  • Like 2

Hmmm ok. I have driven a supra here locally with a gt3582r with a 0.63 rear and with the 3L and makes 350rwkw on 16psi. Granted it's a different motor, but it doesn't seem to choke it at all and response is insane.

I can't find any results on the 6062 gen 2 yet. Anyone got anything interesting?

For those who haven't seen it yet. The 6062 is rated for 750HP where the 6262 and 6266 is 705 and 735HP respectively.

Smaller turbos that flow more are always a good thing however these things need to be confirmed in a real world comparison! Just in case they've added more weight to the comp wheel which will affect spool up

All I could find with MR google was a 1.8L VW guy who did a boost vs RPM log and got 20psi by 4900RPM untuned.

Am I missing something?

Also is this the first release of a new line of Gen2 Turbos? It would be awesome to see this new design move it's way up to larger turbos for better spool vs Power.

double post:

Just saw the Gen2 6266 and 6466 are listed too. oops

800 and 900HP respectively

6266 Gen1 735HP

6266 Gen2 800HP

I'd love to see side by side dyno results

Im also keen to see results of Gen2 6062 and Gen2 6266 units..

Ive found 6466 vs. Gen2 6466 on a US Supra forum and it was identical spool, but with +30hp around the peak 1500rpm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...