Jump to content
SAU Community

Recommended Posts

1992 Nissan Skyline R32 GTSt

Gun Metal Grey

98,000 km

Rego until August 2005

I have owned this car for 1.5 years and am selling purely to cover some debt.

This car has a HKS 2835R and all the support equipment that goes with it including upgraded pistons.

It has not been tuned for max power cause was waiting for a power fc, but was dynoed immediately after landing at RacePace to get the air/fuel ratios right.

It is in excellent condition for its age with only a few scuffs that have been covered by a detailer. The front bar has been cracked and repaired professionally.

$20,000 ono

I can be contacted on: 0407 344 555 for further details

If you want to email: [email protected] however I do not use it very often

I also have a second hand AP Engineering Power FC with hand controller

This has been advertised separately in the Parts For Sale section.

$1800 Firm

Link to comment
https://www.sau.com.au/forums/topic/31815-92-r32-gtst-w-hks-2835r/
Share on other sites

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

just found some info on the HKS 2835R:

in the US the turbo alone sells for $2580 which is almost $3500 here

http://www.hksusa.com/products/?id=711

according to the site this turbo can flow 420ps.

here a short thread from SDU:

http://forums.skylinesdownunder.co.nz/arch...pic/4492-1.html

these are some pics from when it was in japan.

since these pics i have removed the wing, put on 18inch rims and the tacho was stolen.

there are some specs (not all) cause you guys give no lovin without them.

edit: front bar is trust not bomex

http://www.cardomain.com/id/aybee

yeah thats cool. i realise that not everyone wants to spend that much on a 32. but the difference is that your comparing an 89 model car that you cant even see then have to wait months before you can import to a car that is in the country and has been driven locally for a year.

the price is based on:

a cheap and nasty 32 goes for low teens;

a really good one goes for high teens;

so a car with the extras that this has goes for 20 or above.

thanks for the input.

ps. if there is anyone out there that has a 32 and is thinking about doing some modifying. and i know that there are plenty of people that have already done it. then why not step straight into this car rather than frig around and spend more money than you have to. everyone knows its cheaper to buy a car thats already finished.

thanks for the comments roy.

i thought i would advertise in here (and other forums) before paying for ads in mags or papers. the reason is that is if someone was going to respect this car for what it is, then its most likely to come from here.

that said though, the next step is going to be the mags and papers.

1992 Nissan Skyline R32 GTSt

RB20DET

Gun metal grey

96,000km

Brand new head gasket and timing belt

Engine:

upgraded pistons (not exactly sure of brand or degree of upgrading)

HKS 2835R Turbo with HKS external wastegate :wassup:

Stainless exhaust manifold, probably either HKS or Zenitani

600x300x100 FMIC (dont know brand for sure but it has "ZENITANI" sprayed on so could be that)

Bigger fuel pump (unsure of brand or specs but is loud enough to hear when starting)

GTR injectors

Blitz Type-R Blow off valve

HKS pod

Tomei strut tower bar

3.5inch HKS Super Dragger exhaust

3inch Front/dump pipe

3inch Cat

Earthing kit

Exterior:

Genuine Trust front bar

Side skirts and rear pods, no wing

GTR grill (modified std bonnet)

HKS Hiper Damper "Drag" suspension, adjustable

18inch Hijoin HR-109 shadow chrome rims (bad guttering on front left, very minor on others) 18x8 front and 18x9 rear

235 Bridgestones front and 265 Falkens rear

Interior:

HKS VPC

HKS EVC

Turbo timer

HKS boost gauge

Pivot Aluminium short-shift gear knob (not the kit, just a shorter gear knob)

Drift button hand brake (cant work out how its works)

A/M Steering wheel

Tinted windows (darkest legal tint)

Keyless entry with alarm

Sound:

Sony XPlod single cd player

super light weight 6.5inch Kenwood speakers in the doors (designed for racing enthusiasts)

Rice:

A/m horns

headlight bulbs (the ones that look multicoloured)

multicoloured dash backlight (nice'n'rice)

This car has had a very easy life in Australia due to not being driven to uni. Has only done less than 4,000kms in the year I have owned it. It only gets "opened" up very rarely because the external gate is offensive to say the least. Also has only done one, yes one, burnout cause 18inch rubber is expensive. Also engine/turbo is not running full capacity so is not stressed.

ok, with the lack of interest thus far im forced to list all the extras. here we go:

1992 Nissan Skyline R32 GTSt

RB20DET

Gun metal grey

96,000km

Brand new head gasket and timing belt

Engine:

upgraded pistons (not exactly sure of brand or degree of upgrading)

HKS 2835R Turbo with HKS external wastegate

Stainless exhaust manifold, probably either HKS or Zenitani

600x300x100 FMIC (dont know brand for sure but it has "ZENITANI" sprayed on so could be that)

Bigger fuel pump (unsure of brand or specs but is loud enough to hear when starting)

Blitz Type-R Blow off valve

HKS pod

Tomei strut tower bar

Kakimoto exhaust

Front/dump pipe

3inch Cat

Exterior:

Genuine Trust front bar

Side skirts and rear pods, no wing

GTR grill (modified std bonnet)

HKS Hiper Damper "Drag" suspension, adjustable

18inch Hijoin HR-109 shadow chrome rims (bad guttering on front left, very minor on others) 18x8 front and 18x9 rear

235 Bridgestones front and 265 Falkens rear

Interior:

HKS VPC

HKS EVC

Turbo timer

HKS boost gauge

Pivot Aluminium short-shift gear knob (not the kit, just a shorter gear knob)

Drift button hand brake (cant work out how its works)

Keyless entry with alarm

Sound:

Sony XPlod single cd player

super light weight 6.5inch Kenwood speakers in the doors (designed for racing enthusiasts)

Rice:

A/m horns

headlight bulbs (the ones that look multicoloured)

multicoloured dash backlight (nice'n'rice)

This car has had a very easy life in Australia due to not being driven to uni. Has only done less than 4,000kms in the year I have owned it. It only gets "opened" up very rarely because the external gate is offensive to say the least. Also has only done one, yes one, burnout cause 18inch rubber is expensive. Also engine/turbo is not running full capacity so is not stressed.

aybee i think this car is well worth the amount ur asking and i wouldnt go any lower.

put up a website and put an add somewhere in carpoint or the trading post or something, like Roy said i dont think u will get what its worth on here.

even try other forums like honda, wrx etc etc

Hi Aybee, Your cars just like mine, only 4000kms a year is pretty much what I've done this past year! :worship:

You said it was dynoed at racepace but not for power, can i ask how much it made in the state it was in?

Anyway, good luck with the sale :cheers:

thanks inark, i dont want to go too low but its only worth what people will pay for it.

at racepace it dynoed 180rwkw at 1bar. but they were unable to tune the VPC so that was just from playing with fuel mixtures.

car is now in the trading post. already had a call and the guy offered my 18000 as is, and he will work out the RWC.

so if anyone has any offers above that without RWC then very keen to here them.

Yeah seriously no offence but you can get an R32 GTR for less than what you're asking, and you can only sell for what people are willing to pay. At the end of the day its always going to be a 2.0 single turbo and no matter how much you mod it most people with that money to spend will opt for a stock GTR over a highly-modded GTST. I know I would. I wouldn't pay more than $14k for an R32 GTST no matter how much it had been modded, that's just me I'd go for an R33 instead over that but if you've got a solid offer for $18k then I suggest take it, seeing as no response for almost a month now.

2bad - why would you bother making a post like that? Every sentence you have written is irrelevant to the sale of this car. What does it matter what you or most people would do? It only takes one person to buy it.

Yeah seriously no offence but you can get an R32 GTR for less than what you're asking, and you can only sell for what people are willing to pay. At the end of the day its always going to be a 2.0 single turbo and no matter how much you mod it most people with that money to spend will opt for a stock GTR over a highly-modded GTST. I know I would. I wouldn't pay more than $14k for an R32 GTST no matter how much it had been modded, that's just me I'd go for an R33 instead over that but if you've got a solid offer for $18k then I suggest take it, seeing as no response for almost a month now.

2bad, thats cool thats your own opinion. if you want to know mine: i dont think that i would buy a gtr, even if i had heaps of cash. theres nothing wrong with loosing traction. also i wouldnt buy a 33 cause i dont like the look as much. and any gtrs out there for 22k probably wouldnt even be worth looking at. after all you get what you pay for. and this car is for someone who loves 32s. like inark, who has put a bit of cash and love into his car, he realises the value of this car and agrees with the price.

thumpr, thanks for that. your so right.... now all i need is that one person.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...