Jump to content
SAU Community

Recommended Posts

.63 or .82 gt3071 with e85 and plenty of boost should come about as close as your gonna get to your goal.

or if your happy to go crazy with boost (and not worried about turbo life and heat etc) you could try a large rear housed gtx28 of some sort

.63 or .82 gt3071 with e85 and plenty of boost should come about as close as your gonna get to your goal.

or if your happy to go crazy with boost (and not worried about turbo life and heat etc) you could try a large rear housed gtx28 of some sort

I did actually have teh GTX28's in mind for the 1J, cant help but think the turbine side will be too small for the 3L

But I am now looking at those options, Cheers

Fuel economy and E85 dont mix :)

I did 180kms on the weekend and used 40L lol

Ive done 280ks to 40oddL of 98 and the car is standard lol

  • 2 weeks later...
  • 2 months later...
  • 3 weeks later...

I have no updates. But 3.0L related

Has anyone seen either a td06-20g or any other smallish turbo on a twincam 30? I have seen a few gt3076's done

Or if you had a choice the best super responsive circa 300rwkw turbo

I'm thinking I want 20+ psi at 3000 rpm and mega midrange

I'm planning on slapping together a 25/30 for round 2 on the 14th of July and i'll be running a TD06-20g High mount.....

I shall inform you of how it goes!

You can use this one:

http://justjap.com/store/product.php?productid=17872&cat=&page=1

But ideally you want one a tiny bit shorter as once you deck the head and block and the belt stretches a bit it gets real close....

Much better off relocating the drivers side tensioner, just wait until you have a belt so you can figure out exactly where to put it as the dimensions in the PDF don't always work.

I used the measurements in the PDF with the above belt and it didnt work, couldn't get the belt on but it was close. Probably just needs to be moved to the right 5-10mm. No set measurements are garunteed to be perfect as theres too many variables.

here is what i do at work;

i grind the head & block

i put the cams in

i put the crank in

i put a thick rag on the deck

i put the head on

i put on all the timing gear

i put bearing blue on bottom of stud,

i then line up tensioner to where its best suited

i then drill and tap the M10x 1.5 thread

  • 1 month later...

Started getting things together to get my dirty thirty project started. Funds are an issue for me so may take longer than u guys lol. But I don't wanna take short cuts so a bit longer without will be worth the wait. Picked up a complete rb30 out of an r31 couple weeks ago for a hundred bucks and a case. Planning on getting an engine stand soon and stripping it down. Then finding a r33 25 head as I want it built out of car to be slotted into daily when complete. So much info! Been reading for the past 2 weeks and printing shit off. Gerg, looking at bringing block, head and other bits and pieces down down to you if ur in Moorebank cause its around the corner from me. A while off though lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...