Jump to content
SAU Community

Rounded My Sump Plug!

Mean_R34

By Mean_R34,
in Victoria

 Share

Recommended Posts

Mean_R34 Mentor

Mean_R34

Posted
Posted

Last night I decided to service my car. In the process of undoing the sump plug, I rounded it to the point I can't.

Tried plumber's stilsons, hoping the teeth would grip it but to no avail.

Filed back the head to square. Had a thought of hacksawing the head and using a large blade screwdriver but the bolt seems to be a fairly soft metal.

Anyone got any ideas from here?

Link to comment
https://www.sau.com.au/forums/topic/320914-rounded-my-sump-plug/
Share on other sites
THR34T Mentor

THR34T

Posted
Posted
Last night I decided to service my car. In the process of undoing the sump plug, I rounded it to the point I can't.

Tried plumber's stilsons, hoping the teeth would grip it but to no avail.

Filed back the head to square. Had a thought of hacksawing the head and using a large blade screwdriver but the bolt seems to be a fairly soft metal.

Anyone got any ideas from here?

drill through the plug n get a new bolt? lol

ashneel Grand Master

ashneel

Posted
Posted

get a smaller size socket that you dont need to buy a cheapo one and bash it onto the sump plug and undo it. did the same wheni had my R33. was the only way to get it out. or as mentioned above drillit out but just be carefull you dont f**k the threads up ont he sump

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

^ Yep smaller socket

or

Easy out - one of those mobile people that get manifold studs out of the head (Thread Doctor), should be able to do it.

They are quite reasonable priced if thats what it comes too (couple hundred or less)

krzysztof Mentor

krzysztof

Posted
Posted

get a better pair of vice grips.. if there is still a head on the nut, regardless if its rounded, jam some vice grips on there but do them up soo tight that its almost hard to get them to clamp, after this your better of knocking the vice clamps with a hammer (leftie loosie rightie tightie), than trying to undo them with your hands as the impact will have a better effect..

if you can't undo them with this, which i find hard to believe then get someone to weld a bar on there, if your doing it right it'll either come out or your'll snap the head off the bolt, if this happens i wouldn't bother with an easy out as its well and properly stuck all you'll end up doing is snapping the easy then its just a bigger pain in ass..

next step work out what size its meant to be and drill and re-tap the thread..

good luck

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)

i remember that sparkplug thread. some guy got work done at a workshop, and came home to find that. shocker!!

oh yeah. vice grips would be my first step. super tight. you may even need multigrips to close the vice grips :thumbsup:

Edited by Munkyb0y
Birds Grand Master

Birds

Posted
Posted

Amen to vicegrips. These suckers are so great with bolts and no sump plug on any engine should be too tight for vice grips. If it is, then the person who put the sump plug back in did an awful job of it!

Don't think I have to tell you to use a new sump plug and washer afterwards lol.

Mean_R34 Mentor

Mean_R34

Posted
  • Author
Posted

Thanks for all the advice guys. I did think of the tack weld, but looked around and no welder.

I might go with the smaller cheapo socket + hammer.

The spark plug is a great idea, but might drop my road clearance belong 100mm. :)

^ Yep smaller socket

or

Easy out - one of those mobile people that get manifold studs out of the head (Thread Doctor), should be able to do it.

They are quite reasonable priced if thats what it comes too (couple hundred or less)

A COUPLE OF HUNDRED??!! How is that reasonable Ash?

_Ryan_ Grand Master

_Ryan_

Posted
Posted
Thanks for all the advice guys. I did think of the tack weld, but looked around and no welder.

I might go with the smaller cheapo socket + hammer.

The spark plug is a great idea, but might drop my road clearance belong 100mm. :)

A COUPLE OF HUNDRED??!! How is that reasonable Ash?

sif a sump wouldnt be cheaper?

paulR32gtr Mentor

paulR32gtr

Posted
Posted
....or get a file and file the nut to a smaller socket size, at least this way no drilling, no bashing, no vicegrip.....involve and you could actually use it again.

Yeah just file it flat on opposite sides and use a big shifter spanner ... don't know about using it again though!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • dbm7
      Stagea Front CV Axle Question

      By dbm7 · Posted

      Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...