Jump to content
SAU Community

Recommended Posts

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

i see you have time to post comments, but i dont see a pic of your mates cup holder!!!!!!!!!!

;)

Sorry man some one already beat me to post the pic ;)

Hey guys theres this new site with images and everything!! www.google.com.au :)

post-24834-1274948376_thumb.jpg

There are subtle differences though between series 1 and 2

Series 1 has a plastic piece of crap which you take out and flip to hold up smaller diameter drinks eg red bull

Series 2 has a metal clip which folds down and locks into place for smaller diameter drinks

I actually reckon its the best cup holder I've seen in a car, holds normal cans, small cans and also choc milk hehe

I've never seen a 33 without one though, weird that some of you dont have it!!

But back to the original topic, 33 is the best all rounder in terms of price, performance and age/kms :)

Thx for the pic mate, my mate "factory" cup holder look just like that.

I like this one! And it's for sale!

post-12712-1274961817_thumb.jpg

Interior shot off the forums:

post-12712-1274961834_thumb.jpg

Make sure the car come with the cup holder ! Otherwise you might spill your drink when the ATESSA kicked in YO !

IMG_0411.jpg

See a center consul for a r33 with the stupidly shallow cup holder. It also have a little metal bracket the fips up to hug the upper part of the cup

Edited by central coast person
post-42920-1274796608_thumb.jpg

I got one of this and keeps the drink cold too!

It must perform well it's a "type s" ;)

I wonder if it were a "type r".... ;)

But seriously - are cup holders really that important???

I can only speak from the R34 point of view - but the cup holders in the R34 fail quite badly for two large drinks from maccas. I heard somewhere the guys with manual trans have issues of hitting thier drinks when shifting into 2,4 and 6 (if you have a GTR). I drive an auto and I too find myself nudging the drinks with my wrist when going into drive or decided to use the tiptroninc.

To the OP, there is nothing wrong with the 33GTR per se, but it will always be the 'middle child'. as far as personal preferences go, thats all they are - personal preferences. 32's are starting to show their age, but hold a cult status, 33's aren't as old, but still quite affordable, 34's are amazing, but still quite expensive for your average joe. i guess it all comes down to 'personal preference' and budget.

FFS if anyone thinks the standard SQUARE recess in a R33 can hold a large maccas cup then be my guest to show us.

Record it and youtube it. Place it in the SQUARE, and drive around corners. Then brake lol. It doesnt hold shit... unless its square

Edited by Granthem

Without reading the whole thread.... Imo the only thing wrong with a R33 (other than the power windows) is they're too common and hence all the little snobs think that makes them uncool. I know of guys that used to preach the whole skyline religion years before I owned one and these guys creamed when talking about 33's. Ask them now about 33's and all of a sudden their not so cool as there's so fkn many of them here in Aus.

Just my -0.2c

Without reading the whole thread.... Imo the only thing wrong with a R33 (other than the power windows) is they're too common and hence all the little snobs think that makes them uncool. I know of guys that used to preach the whole skyline religion years before I owned one and these guys creamed when talking about 33's. Ask them now about 33's and all of a sudden their not so cool as there's so fkn many of them here in Aus.

Just my -0.2c

What i have always wondered is are/were r33's more common than r34's in japan? Now days seems like just about every 33 ever made has come to Aus lol but just wondering if the r33 sold the best i guess it did have along production life 93- early 98 althouhg the r34 went from 98-2002? or only 2001?

Sweet, I always thought there was a lot of 33 GTR haters but turns out im very wrong. Good too see. So how bout we get some pics of a few members rides, With or without cup holders. lol

Ill start

Heres my N1.

post-42920-1275013129_thumb.jpg

It must perform well it's a "type s" :)

I wonder if it were a "type r".... :)

But seriously - are cup holders really that important???

I can only speak from the R34 point of view - but the cup holders in the R34 fail quite badly for two large drinks from maccas. I heard somewhere the guys with manual trans have issues of hitting thier drinks when shifting into 2,4 and 6 (if you have a GTR). I drive an auto and I too find myself nudging the drinks with my wrist when going into drive or decided to use the tiptroninc.

Well, its not a MUST have but a good to have. For 12bucks I cant complain. Have a look at the picture and you'll find that the cup holder I posted actually can house a mobile phone in front too!

post-42920-1275013226_thumb.jpg

post-42920-1275013232_thumb.jpg

post-42920-1275013237_thumb.jpg

post-42920-1275013247_thumb.jpg

Customer walks into f*kuoka Motors and says, "I'm looking for a nice GT-R"

Salesman: "We have a really lovely looking R33 GT-R over here sir!"

Customer: "Does it have a cup holder?"

Salesman: "And this car has several mods that have brought up the power to 318kw @ the..."

Customer interjecting: "Yes, but does it have a cup holder?"

Salesman: "Well it's right there in the middle sir."

Customer: "Where?"

Salesman: "There in the middle sir, in front of the lidded compartment."

Customer: "You mean that's a cup holder?"

Salesman: "Yes it really is sir."

Customer: "Looks like something my G/F would use for a cosmetic..."

Salesman getting annoyed: "Look sir, that cup holder will keep any cup steady no matter what the acceleration!"

Customer: "And what about deceleration?"

Salesman still annoyed: "Really sir, if you drink most of your drink first before taking off, I'm sure..."

Customer: "Hahaaaa, caught you out didn't I? Now what if I want to upsize?"

Salesman: "Sir - Well I'm sure you can fit the drink inside the lidded compartment - SIR!"

Customer: "I'm not talking about upsizing my drink - we're onto popcorn now - SIR!"

Salesman: "What the f*kuoka - GET OUTTA HERE!!!!"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...