Jump to content
SAU Community

Recommended Posts

Nice looking front bar Mark no doubt would have been pretty savage on the bank account although you often get what you pay for. Will be interesting to see how much quicker you can go with some more power and a bit of suspension tuning. I think you might have your work cut out for you trying to better the cup cars time though the thing went quicker again last track day now lapping 54.3. Certainly will be good to watch you have a crack at it though.

Edited by dazmo

sure will be tough but I cant wait to give it a crack! If you don't set your targets high you will always underachieve.

I really need to be sensible about it though, as an inexperienced driver, this thing is now capable of biting me in the arse.

We were running a tune with 535hp, conservative as the guys had literally just finished putting the car together the previous day.

There is a list of mods at the start of the thread, though we used a different radiator (PWR rather than the CBRD)

Hopefully will run about 600hp next time out.

thats awesome.. 54's next time maybe :(

also been wondering, how hard is it to adjust front camber with the hi octane items and how much did they cost.

I dont like the kit i have at the moment as its difficult to change from street to track, then back again.

Best chat to Trent and the guys at mercury. I haven't seen them set the camber in person.

We haven't fully tuned the suspension yet, and went out last time with some rough adjustments. Will have it sorted for the next outing.

The high octane setup is expensive. What control arms did you go with?

Nice looking front bar Mark no doubt would have been pretty savage on the bank account although you often get what you pay for.

Darren, the bumper was actually very reasonably priced. It cost less than many front lip spoilers on there own. It will require some mucking around though when fitting to reposition the coolers to fit perfectly and maximize the use of the cooling ducts/cutouts.

Mark,

Bring your car to Drive Bathurst in November... At least on the mountain you will get to unleash all the cars potential.

Im sure doing 55's around QLD raceway is awesome BUT

Just imagine doing 2.20 - 2.30 min laps around Bathurst...

the beast should be there too....300kph here we come....

Mark,

Bring your car to Drive Bathurst in November... At least on the mountain you will get to unleash all the cars potential.

Im sure doing 55's around QLD raceway is awesome BUT

Just imagine doing 2.20 - 2.30 min laps around Bathurst...

We would definitely crew for you Mark if you want to go!!

Now we are talking.

Easy - truck the car to Bathurst with Toll Logistics and fly down to Bathurst.

Will be the best 2 days driving of your life guaranteed.

Given we are there 5 days Im having 1000 litres of E85 delivered to the track for 09GTR and myself.

Would be easy to bring you in on this...

You will get to do approx 70-80 laps over 2 days.

Edited by White 35
  • Like 1

so the the guys at mercury started fitting the bumper today. it was a real bitch to fit, not an oem-like fit thats for sure.

managed to get it to line up well in most paces with a lot of swearing, though the fitment at the side indicators is a problem we are yet to solve. fitment at the cooling plate under the hood is a little off also. I will be in correspondence with top racing in the morning to see if there is anything they recommend.

still haven't fitted the air scoops and deflector at the intercooler opening.

gallery_56949_3818_59908.jpg

sounds like there night be a fix for the fitment issue.

top racing and their manufacturer carbon weave have personally called me 3 times thisafternoon and sent about 4 emails to get on top of the problem. seem very keen to be helpful.

will keep you posted...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...