Jump to content
SAU Community

Recommended Posts

Hi all,

I have an R33 GTS-T with 87,000ks

The gearbox was a little notchy when I bought it so I did a service as recommended on this site with the castrol VMX 80. I also used the Nulon anti wear additive.

It has improved all shift and noise but the box still has a nice notch into second until very warm, dosnt usually crunch (has happend once I think?)

Is this normal for one of these? or is the box screwed?

Would using the redline shcokproof stop the notch for a while?

Where do you buy this redline stuff and what weight is recommended?

look forward to peoples thoughts

my 34 has a notchy shifter (1st 2nd only) when cold and I've put that redline stuff (shockproof/smurfs blood) and I'm not sure it has improved anything... If you intend to be keeping the car for a while I'd say save up some dough and get the gearbox and synchros reconditioned for teh win.

Hey mate, i had exactly the same situation, bought the car when it had bout 85000k and gearbox was pretty stiff from 1st to second when cold, got redline in there now, still noticeable for the first few shifts but much better than before!

rb boxes r often notchy when cold, just take it easy. lightweight might help a bit no experience with it. heavyweight is rubbish for the gearbox, i dumped the oil after a week!

maybe try motul fflsd 75/90+nulon additive i've used it many times on customers cars and my own

see how ya go, if its synchros stuffed, nothing can bandaid that :P

redline will help the problem but give valvoline super synth 75w90 a go, its only 50 bucks, i had a crunchy 2nd gear in a past car, dumped the vmx80 out of it, changed it to 75w90 valv, still kinda notchy wen cold but after 5mins, it was perfect

vmx80 made it crunchy wen cold and notchy wen hot

some boxes love vmx80 though, it all depends on the condition of the box, different boxes like different weights, that is why you will often find people will have different views on oils, especially with gearboxes

edit: i just checked out that site, very cheap pricing on the redline oils, i will order some smurfblood for my gtr :P the prices on that site are almost half the price of redline products i see on shelf at shops in perth!

Edited by snozzle

yeah the vmx80 was great when it went in, note I used the nulon g70 too but its gotten worse again.

Very stiff when cold, only into second and not that flash wehn hot either, i might try the redline and see if it makes a difference

do you use the nulon dditive with the redline shockproof?

I recently pulled apart an R32 RB25DE box with pretty low kays on it as I had it in my track car, the box is smooth and quiet and everything worked nicely except that once it was nice and warm the top gear synchro stopped working.

In a nutshell, while the synchro wear was within factorly limits, it just did not work when it was hot and different oils made no difference. I change dthe top gear synchro ring and it now works perfectly, the only problem is that now the other four feel tired comapred to it including the standard notchy shift from first to second. Someone mentioned that RB boxes are pretty well known for it, I would go further back than that, it is fairly typical of Nissan and Datsun boxes in general. So long as it is only noticeably notchy when it is cold I would just go easy on it and worry about it if the synchro gets batty when it is hot. I plan to pull my box down again later this year and replace the rest, along with having a look to see if I can swap the top gear with my other box, which is an R31 RB20DET box and has a shorter top gear ratio that is much more suited to track use.

You want "lightweight shockproof" and get it from http://www.performancelub.com/ (excellent customer service)

+1 for Harold hs Awsome to deal with.

the R32 gtr box 4US qaurts of Redline.....

ok I have ordered the oil. Ten out of ten for customer service from harols (the website recommended above)! just fantastic. Oil should be here tomorrow.

Now here is my question. I have vmx 80 with the g70 additive in the car now, has been there for about 1500ks.

Apparently the g70 reduces friction and causes the syncrhos not to engage. If I drain the oil overnight will it get all the nulon out or do I have to flush it? If I drain it will the little bit of nulon left upset the redline oil?

thoughts would be appreciated, just such a pain to drain it, dont want to do it more than I have to if it can be avoided

thanks

  • 1 month later...
redline will help the problem but give valvoline super synth 75w90 a go, its only 50 bucks, i had a crunchy 2nd gear in a past car, dumped the vmx80 out of it, changed it to 75w90 valv, still kinda notchy wen cold but after 5mins, it was perfect

vmx80 made it crunchy wen cold and notchy wen hot

some boxes love vmx80 though, it all depends on the condition of the box, different boxes like different weights, that is why you will often find people will have different views on oils, especially with gearboxes

edit: i just checked out that site, very cheap pricing on the redline oils, i will order some smurfblood for my gtr :D the prices on that site are almost half the price of redline products i see on shelf at shops in perth!

what was the site were u got the redline gearoil for almost half price

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...