Jump to content
SAU Community

Recommended Posts

hey guys, i was deciding where to go with wheels on the m35 when it lands...

atm its got skyline wheels on it 18's

post-22208-1277013187_thumb.jpg

post up pics of what wheels you like on m35's or what wheel you HAVE put on your m35!

also, because its awd. does it mean i have to run the same rim size and width's all round?

Edited by bLaQ.bOi

Regarding width, yes. Rolling diameter seems to be very critical, not the 2-3% variation that other attessa equipped vehicles seem to allow.

If you're looking for a new home for those 18's when you find replacements, let me know, I'm after a set of those.

BTW, the car looks great, you must be busting to get your hands on it!

Cheers, Dale

yep ill definatly be selling them

if i decide to keep the car, or sell it and go after one with a sunroof like i wanted. im not sure

if i decide to keep it, it will be getting a respray asap. ill keep the colour on the low atm still trying to decide!

so need to run the same wheels. that sucks lol

anyone got any pics of thee cars with gangster meshies on them haha

vxss?

I'm sure there's a fella on here for NZ, coincidentally White with the Nismo kit, had 19x10 or 19x11 mesh of some sort, with seriously pulled wheelarches and very low. Maybe someone else can remember, his looked very tough indeed.

Yeah I reckon 19 - 20" for the M35, those arches are so big that they need some size!

To get a flush fit i used 19 x 8.5 +22 offset. these just fit under the guards without any rolling, and have plenty of clearance on the inside.

So you could definitely fit 9.5 +35 under the guards, but might be tight on the inside of the fronts. (there is loads of inside room on the rears) but I wouldnt recommend staggered on the M35

Here is how the 8.5 +22 offset fit.

_MG_7823.jpg_MG_7824.jpg

Edited by bbenny
Yeah I reckon 19 - 20" for the M35, those arches are so big that they need some size!

To get a flush fit i used 19 x 8.5 +22 offset. these just fit under the guards without any rolling, and have plenty of clearance on the inside.

So you could definitely fit 9.5 +35 under the guards, but might be tight on the inside of the fronts. (there is loads of inside room on the rears) but I wouldnt recommend staggered on the M35

Here is how the 8.5 +22 offset fit.

_MG_7823.jpg_MG_7824.jpg

That looks awesome dude! Love the wheels, that's how I'd like mine to look.

Can I ask what size your tyres are? Is that with standard ride height as well?

Cheers.

That looks awesome dude! Love the wheels, that's how I'd like mine to look.

Can I ask what size your tyres are? Is that with standard ride height as well?

Cheers.

Thanks mate :rolleyes:

Tyres are 225/40 19 Which is still a bit small from what I recall, so my speedo is off by a couple of %

It is a fair bit lower than standard, I have Tanabe adj. coilovers in there, so its probable about 2" lower than standard in those pics, but it sits a little lower now as the new springs have settled in.

Here is a shot of the front height (sorry its a crap phone pic I already had) - rear is the same.

post-a291689-brembofront.jpg

post-4475-1277171890_thumb.jpg

I have these 19" x 8.5(see pic)....sorry about the tyre shine.

But looking at getting these!!....19" x 8.5

http://www.axiswheels.com/view-wheel/axis-super-hiro

post-37023-1277173637_thumb.jpg

I have these 19" x 8.5(see pic)....sorry about the tyre shine.

But looking at getting these!!....19" x 8.5

http://www.axiswheels.com/view-wheel/axis-super-hiro

They are sweet wheels! I had them on my C34 stagea. Awesome quality and great price

Only downside with the 8.5" is they dont have the concave spokes pulling in. Make sure you get the +20 offset (they come in +35 or +20)

I reckon the 9.5" +45 with a 10mm spacer would be sweet in the ARX that way you get some more dish and pull on the spokes. They are super aggressive and should just fit!

here is a pic of the 18x8.5" on my C34

image_url-4475-1242709296.jpg

Edited by bbenny
They are sweet wheels! I had them on my C34 stagea. Awesome quality and great price

Only downside with the 8.5" is they dont have the concave spokes pulling in. Make sure you get the +20 offset (they come in +35 or +20)

I reckon the 9.5" +45 with a 10mm spacer would be sweet in the ARX that way you get some more dish and pull on the spokes. They are super aggressive and should just fit!

here is a pic of the 18x8.5" on my C34

image_url-4475-1242709296.jpg

yeh I need dish.......don't really want spacers on it though....need the wheels to fit under without scrubbing at the height it is atm.....want to be able to get on the track very soon!

Edited by Jetwreck
Who is that Axis range available through in Australia?

From what I understand there is no distributor here in Aus.

I think Tempe Tyres brought a few containers in though a while back, so maybe try them to see if they have anything left. Late last year they had a handful of 19x 9.5 +45 in stock...

Jetwreck: I fricken hate spacers as well. get the right tool for the job!

speaking of which - has your nismo ECU arrived?

And on that topic, ecu's, has anyone spoken to Toshi on here regarding a re-map, I know he does the other Nissan ecu's and he's very good.

Edited by richzx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...