Jump to content
SAU Community

Recommended Posts

lfa-4-kopia-625x416.jpg

http://www.caradvice.com.au/71490/hiromu-n...-near-the-ring/

In a horrible and tragic twist of fate, the two-tone Lexus LFA Nurburgring Edition featured on CarAdvice yesterday has been involved in a fatal collision on roads outside the famous circuit, killing Toyota's chief test driver, 67-year-old Hiromu Naruse.

According to reports, the Lexus LFA driven by Naruse-san veered into oncoming traffic and had a head-on collision with two other test drivers in a BMW who are now in a critical condition.

Several sources have indicated that all occupants in both cars were wearing helmets at the time of the accident which underlines the severity of the crash.

Naruse-san had been with the Toyota Motor Corporation since 1963 and most recently had been chief of the Gazoo Racing teams which fielded the Lexus LFA entries in the Nurburgring 24-hour race.

Labelled the "Godfather of the LFA", Naruse-san was regarded as one of the most respected test drivers in Japan and is believed to have clocked more time on the Ring than any other Japanese driver.

Edited by PM-R33

More pics....

http://theage.drive.com.au/motor-news/supe...00624-z0e6.html

Another reason to buy a Euro over Jap, No one can beat them in passenger safety. The LFA was way way over on the wrong side of the road.

It is sad to hear :) I have to wonder why he died though and the people in the BMW did? Considering both occupants of the LF A were wearing helmets etc, it is a bit worrying.

In the quest for speed, sacrifices are made to weight reduction, most of the sacrifices reduce the strength and crumple zone of super cars. The Italians and Germans have done it right. By the looks of this car Toyota has forgotten about safety to build a stupidly quick car. In the end that is what you have to expect can happen when travelling high speeds in any car. A helmet can improve the chance of survival, but it doesn't mean you can survive big crashes...

In the quest for speed, sacrifices are made to weight reduction, most of the sacrifices reduce the strength and crumple zone of super cars. The Italians and Germans have done it right. By the looks of this car Toyota has forgotten about safety to build a stupidly quick car. In the end that is what you have to expect can happen when travelling high speeds in any car. A helmet can improve the chance of survival, but it doesn't mean you can survive big crashes...

Hmmmm.... By the looks of the car you can judge whether Toyota have made a safe car or not? BAHAHAHAHAhhahahahahahhaha. :)

More pics....

http://theage.drive.com.au/motor-news/supe...00624-z0e6.html

Another reason to buy a Euro over Jap, No one can beat them in passenger safety. The LFA was way way over on the wrong side of the road.

In the quest for speed, sacrifices are made to weight reduction, most of the sacrifices reduce the strength and crumple zone of super cars. The Italians and Germans have done it right. By the looks of this car Toyota has forgotten about safety to build a stupidly quick car. In the end that is what you have to expect can happen when travelling high speeds in any car. A helmet can improve the chance of survival, but it doesn't mean you can survive big crashes...

As exiting as it is for me to have someone on the forum who is awsum enough to apparently have a Ferrari, let me just say:

A) If you have such an issue with Nissans and Japanese cars in general, join a Ferrari Forum

B) Find me evidence of a Ferrari with a 5 star safety rating....

Interestingly, NCAP 2009 top five does have a Euro car on top

http://www.goauto.com.au/mellor/mellor.nsf...A2576BA000EDCD8

Followed by 2 Japanese cars (2+3), then a Korean (4), with another Japanese and 2 Euros coming in equal 5th.. so of the 7 cars in the top 5, 3 are Japanese, 3 are European, and one is korean, making it 4 Asian cars all up... NO Italians, 1 German....

Further to that, suggesting that saving weight reduces crumple zones and strength... Crumple Zones are a designed weak spot, which is in actual fact a direct opposite to strenght.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...