Jump to content
SAU Community

Recommended Posts

hey guys i got a r32 and **** me u can hear the std bov a mile a way! I have a hks air filter and all the pressure is blown out throw that as there is nowhere else for it to go! sounds good!@not sure if the previous owner took the plumback bit off?

what would happen if u put a piece of woopy cushion over the end of the bov snout?? Hehehe imagin the noise hehe

The pipe i think your talking about is the one about an inch in diameter going down towards the turbo? Thats the recirculation pipe it goes back into the pipe from your air filter and is plumbed in just before the turbo. If you take this off youll have to modify your pipe from air filter to turbo, either getting stainless piping or patching the stock one.

S

Just get a pod filter and leave the plumb-back in place, the sound will be almost as loud.

what would happen if u put a piece of woopy cushion over the end of the bov snout?? Hehehe imagin the noise hehe

Hehe, i think a kazoo or something would sound pretty funny too.

ok i tried this the other day and yeah the car runs heaps rich. I loved the sound but....the car wouldnt idle properly and stalled most times i came to a stop. HOWEVER if u disconnect the vacuum line going from the inlet manifold to ur BOV and block it off then..... insted of pshhhhht its "FLUTTER". Sounds amazing and the car runs a little richer but not really noticeable

What, the whoopie cushion idea? Or the kazoo idea?  :P

Check the net and you'll see its been done before, theres some movies around, I think it was some sort of Mazda, tried various things, eg baloons, party streamers etc, sounded quite funny. No link sorry, shouldn't be too hard to find...

Btw, my stock R32 GTSt bov is like twice as loud as the my GTS25t one, same filter too, dunno why that is...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
×
×
  • Create New...