Jump to content
SAU Community

Recommended Posts

i want to drop my r34 (with the standard bodykit) and i want to keep my ride quality as much as possible as im not worried about going fast around corners or anything so would lower springs be the way to go? maybe some do's and don't, brands and prices will help.

p.s i am tying to limit how much i spend so money saving suggestions would be great!!

Link to comment
https://www.sau.com.au/forums/topic/331808-best-way-to-lower-an-r34-gtt/
Share on other sites

get lowwer springs but your ride will change as if you are going to lower your car uou will need stiffer springs to compensate for the redused up/down travel .

another option if you know of a work shop that specializes in leaf suspention (usualy found in 4X4 mags) they can heat and compress your springs slightly to lower your car.

DONT cut the springs !!!!! hit a bump or get airborn and your spring will fall out (been there done that )

Lowered springs (King Springs, Pedders, Lovells) on standard shocks is probably the cheapest option.

- Pros: Cheap, looks ok (if that's what you're after)

- Cons: Increased wear and likelyhood of failure on shocks, worse handling, etc.

Read SydneyKid's Lowering Springs With Standard Shocks thread for some more info.

  • 3 months later...

glowstreet the gt-r shocks wont fit im quite sure, i have a set at the moment that i got off a friend for free, took em to a mechanic and asked if it would fit and i found that the front 2 will fit, but the rear 2 will not

glowstreet the gt-r shocks wont fit im quite sure, i have a set at the moment that i got off a friend for free, took em to a mechanic and asked if it would fit and i found that the front 2 will fit, but the rear 2 will not

On a GTT it will fit all the way round. on a GT or a 33 GTST it won't fit the rears. The fronts are also a lot lower but the rears will be same height

Whilst it might fit, everything I've read says it will be entirely the wrong spring rates, etc for the car. Apparently the GTR weight distribution is quite different to the GTT (4WD system, engine differences etc). This information has been posted around the forums a few times by people in the know...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...