Jump to content
SAU Community

Recommended Posts

some people are holders of said key :woot:

Manildra (Fueltown) E85 all the way baby! :laugh::)

I will prob use Caltex E85 in the warmer months, but only once Trent has had a check over it on the dyno with the fuel in. Even the variance between United and Fueltown needed a little tweaking.

But i reckon get something installed in the tank to monitor ethanol levels and get an ECU to modify accordingly (interpolate between two+ maps). Basically how the the flex-fuel cars work. Just need a good enough ecu i guess.

  • 1 year later...
  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

How has this all progressed? Lots of loose ends, posting here for Googleability. Can't seem to find much info from the Google.

Where can I find current E85 prices?

How has the price/economy of it changed? (I don't drive currently so I don't know the prices)

Have any people noticed any ups and downs after an extra year of use?

Edited by jukic.j

So it's about 25c cheaper but about 30% more fuel is used unless I muddled that figure?

Don't forget to add 15% more HP into the equation.

Heard a rumour that United is going to equip more servos with E85. Any truth in that or is it simply just a rumour?

Would love to get the 33 on E85 full-time but the lack of nearby servos that stock it worries me lol

More, 50-70c

United E85 - 97c

BP98 - $1.60

$1.60? There do you fill up :O

I paid i think $1.45 the other day, might have been less. ULP on the usual good days has been ~$1.25 so it wasn't too much more.

But i reckon get something installed in the tank to monitor ethanol levels and get an ECU to modify accordingly (interpolate between two+ maps). Basically how the the flex-fuel cars work. Just need a good enough ecu i guess.

hahahahah.... indeed.

Melbourne is quite spoilt for E85 outlets - United has quite a few now, it's a pity the Caltex roll-out seems to have stalled a bit though. Don't really care though, as you're better off running United anyway.

United in Scoresby has E85 that wasn't on the website last time i looked too.

Yeah I think I'm going to run E85 too, well at least look into it seriously. I'm pretty spoilt for choice with stations around me (Caltex and United).

Just not sure how much more efficient it'll be. Still I'm finding that I'm paying around 1.45-1.54 for ULP. Dunno where some

Of you blokes are getting those mint prices! :D

Where are you located? There's heaps of E85 servos around me

The 33 stays in Berwick most of the time but also keep it in Frankston occasionally too.

Only Uniteds I know of that stock around those two areas are Patto Lakes and Hallam :unsure:

The 33 stays in Berwick most of the time but also keep it in Frankston occasionally too.

Only Uniteds I know of that stock around those two areas are Patto Lakes and Hallam :unsure:

Hallan close enough !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...