Jump to content
SAU Community

Recommended Posts

Here is the link to Caltex planned rollout of E85:

http://www.caltex.com.au/ProductsAndServic...s/BioFuels.aspx

Marketing manager told me plan is have most running by late September, early October. So that might make it easier for some.

Engine bay looks almost stock, i don't want the look of pumps, lines, surge tanks in the boot.

The 740's are side feed Ash. From what you describe pump maybe close to a dangerous limit there.

If they can do 400rwkw, then thats not their limit :D

There would still be more had i'd imagine.

Hell stock GTR pumps will do 350-380 brand new

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You mentioned unigroup fixed your boost issues, what sort of power is it making now?

The car should be making in the region of 320-330awkw with the hardware you have currently, and if not, somethings not right and I would be addressing that before trying to chase more power through switching to E85

Yeah agree with that, should have shit in 320 just on pulp alone.

Don't wanna take the attention away from OP, but if I have a single 044 pump, and nismo 740's, at what rough power would the pump need to be upgraded on e85? Would it handle 350rwkw on an RB25?

Sorry I would search the upgrade threat, but god known nobody really posts their pumps in it lol

what was the boost issue? air leaks?

Sheesh a combo of three things... The first was one i suspected, t-bolt clamps were pinching where they tightened on the hard piping kit, the second was a tiny leak from a small tear in a vacuum line, and finally most important the actuators were not set up right. They had loose tension, were cracking too early and and unevenly across both turbos.

well, with your fuel pump, if you have 1000cc injectors, (minimum for e85 and half decent power) you need have a pump that can flow atleast 6l/min or whatever the total flow of the injectors are..

not hard to come close to max on 1000cc with e85

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

my evo [ i'm here as i want a r35 :] needed 1000cc injextors and twin pumps to get E85 setup .

is it worth it ? i got 301 atw on 98 v 330ish atw on E85 .. and i live near an E85 outlet but unless you cart around a 200ltr drum in the boot have found you really cant travel out of town on E85 map as theres little chance of getting E85 .

and getting out the lap top to change maps .. draining the tank ... is it worth it ? not sure unless youre very seriously tracking , really need the grunt and have a towcar full of drums . [ read a thread that E85 being supplied at some major tarmac events though ] . and if you can get a switch to change maps do it !

Most of us have 6 injectors, 610's should get me over 300kw. Twin pumps? With a good fuel system one 044 should do more than that.

I don't do that many K's so long distance for me is less than a tank. I can get over 400k's from 70L now. Easy switch over with the Emanage ultimate, dip switches on the front to swap back to 98.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

Hey guys, been reading this for a while im sort of confused,

Ive currently got 251kws my mods are , PFC, 740cc , walbro fuel pump, highflow turbo etc... Can i use E85 + bp 98? 50% 50% , would i need to change anything from my fuel setup? I just want my engine to run safe...

740's will basically get you to 400rwkw on PULP.

Easily enough for E85 with your setup.

A mate on here recently sold his 34 that had 368 at all 4 using GTSS' with 28ish psi on PULP - backed up by dyno's, insane lap times, etc. It was an over the top setup, and not a typical result, but close to the 400 i guess..

Anyhow i made my decision, 1000's going in, retune on PULP in the short term with plans for E85 towards end of the year. Will post results.

So you want to put 28psi through a standard bottem end, good luck with that.. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...