Jump to content
SAU Community

Recommended Posts

  • Replies 467
  • Created
  • Last Reply

Top Posters In This Topic

I just make a cut in them with tin snips, then use some vice grips to tear them off, kind of "rolling" the grips to help tear the metal if you get what i mean?

They're just an interference press fit onto the hub, no need for major surgery to get them off, just bend/tear/snap them off :banana:

It can be fun getting them off - lots of twisting rolling and yanking with vise grips and bull nose pliers. I also used a hammer and chisel to clean up the last remnants off the back of the hub.

Look at the little bastard cowering in the background after I got all tony danza on its ass

post-12551-1284353144_thumb.jpg

i only remove the front stone guards, or else they would be hitting my disc :S

anyway received my pfc d-jetro in the mail today :D however im unsure if the sensors send with it are the map ones (as they look nothing like the normal ones i have seen other on the net)

dsc00059n.jpg

dsc00057cm.jpg

thanks :D i wasn't sure as they look very similar to the apexi boost gauge senders i had.

now just need to work out how to install them and off for a tune

Yeah electronic boost guages use a map sensor as well hence why they look the same - same thing with boost controllers (avc-r etc).

You just need to hook them up off a good vacuum / boost source off the intake manifold. It would be a bit different with the rb26 having individual throttle bodies - I have only ever installed map based ecu's on single throttle body systems. You would want the vacuum / boost seen after the throttle bodies.

Speak to someone who has installed d-jetro for sure!!

Yeah electronic boost guages use a map sensor as well hence why they look the same - same thing with boost controllers (avc-r etc).

You just need to hook them up off a good vacuum / boost source off the intake manifold. It would be a bit different with the rb26 having individual throttle bodies - I have only ever installed map based ecu's on single throttle body systems. You would want the vacuum / boost seen after the throttle bodies.

Speak to someone who has installed d-jetro for sure!!

Thanks did some looking looks like you need to tap some fitting onto cylinder 3 and 4 in the plenum.

So now just need to wait till i get my hks afmless pipe and blitz ebc (id3) and see it off toget a tune. Atm i increase boost to 1bar (bleed valve) and the cars feels alot better still laggy but pulls harder might just keep the n1 turbos for the moment and see what sort of times i xan get at the track

does anyone know how to determine the spring rate of a spring?

i have just purchase a set of coilovers to start off with, however they have had their springs swap for some swifts springs and the owner doesn't know the rate

Usually it is marked on the spring somewhere.

does anyone know how to determine the spring rate of a spring?

i have just purchase a set of coilovers to start off with, however they have had their springs swap for some swifts springs and the owner doesn't know the rate

Bloody easy since most of the steels used to produce these springs have very similar properties.

Try this calculator:

http://www.racingsuspensionproducts.com/spring%20rate.htm

Bloody easy since most of the steels used to produce these springs have very similar properties.

Try this calculator:

http://www.racingsuspensionproducts.com/spring%20rate.htm

thanks :geek: im hoping the spring rates aren't too crazy!

btw could someone explain to me what the helper springs do? (extra spring at the top of the normal spring)

thanks :) im hoping the spring rates aren't too crazy!

btw could someone explain to me what the helper springs do? (extra spring at the top of the normal spring)

You want crazy spring rates, the car will handle better that way

:P

Keeping the main spring captive under full droop is all they are there for.

You want crazy spring rates, the car will handle better that way

:(

Keeping the main spring captive under full droop is all they are there for.

The purpose of them varies depending on if they are helper springs or tender springs.

I'd assume being japanese they are probably only going to be a helper spring.

Article about Helper Springs vs Tender Springs

Sorry my mistake they come with Assist Springs

You want crazy spring rates, the car will handle better that way

:(

Keeping the main spring captive under full droop is all they are there for.

:(

Just because i wish to run 10/10 doesn't make them crazy spring rates, what i am worry about is that the spring rates will be in the 15 region as its not uncommon to run such rates in japan.

I understand that the general thinking is that 10/10 will be too stiff. However i have good experience with those spring rates in my r33 track car and will be testing similar rates out in the gtr. I plan to start with 6/8 combo however i need to do some reading on this Assist spring and select the correct rate for that combo. If 8/6 doesn't work i will move to 8/10 etc etc

till i find the right setup for my gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...