Jump to content
SAU Community

Recommended Posts

I thought i would post up my 98 V E85 tune. I didn't realise i was making such little power in the first place....229rwkw from a GT3040 (0.63) then with E85 252rwkw.

Sorry about the quality and no idea why it is sideways

Feel free to express your thoughts. I think something is wrong as my 550cc injectors hit 94% on cold nights. Still fun to drive though :D

IMG_0358.jpg

IMG_0359.jpg

Cheers

James

Edited by Bond
Link to comment
https://www.sau.com.au/forums/topic/335190-my-e85-experience/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Yeah i was expecting the increased duty cycle but not above 90% Does anyone think it's running too rich?

Besides bad cold start (not a daily driver) it drives really well and is more responsive than before. Now having traction issues but i don't have the best tyres. First and second gear feel very similar but the torque in third and forth feels insane. Pulls hard all the way off the clock.

Edited by Bond
Alittle offtopic, but roughly how much power can 700cc injectors running E85 support?

Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Edited by boostn32
Good question as ive got 720cc injectors, would e85 also clean the injectors and valves due to the alcohol content?

where in the Gold Coast area can you buy e85, how much is it?

Yes, the whole engine and fuel system will probably be spotless, my exhaust was pretty clean too. :D Make sure you change the fuel filter soon after as it may get clogged.

Most places seem to sell it for around $1L, not sure what Caltex plans to sting us yet.

another hijack...

i'm pretty sure my 700cc injectors run at 85% with 320kw at the wheels..does that sound right? are there more people that have tested e85 with 700cc injectors? hopefully i can get away with the injectors i've got.

will i get away with the 280l/ph (from memory) upgraded in-tank pump if i run e85? i'm guessing i'll be headed to around 350kw at the wheels.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

IMO the power has pretty much come from the additional boost, not the fuel at all, as Jez has already noted.

Something is not right with that setup, you should be making 250rwkw on PULP at least & around 280-300 on E85 (if not more).

Injectors under that much duty also is worrying.

Two things are pointing to setup issues.

No one's mentioned the .63 rear on the turbo?

Could that be the reason it's peaking at 5300rpm and not getting the results wanted?

as for injectors funning out on that power, that's got me worried, as I'm soon to be on e85 running 550's :)

Where does a GT3040 fit in size wise compared to a GT3071, GT3076 or GT3082? Is it smaller as the name suggests?

I remember reading a performance place (think it was ERD) recommending a 0.63 housing on a GT3082 on an RB25. But if a GT3040 is smaller than a GT3071 then a 0.63 housing is definitely too small.

I dont understand how joey gets so much power out of his injectors. I would expect 550s to peak out around 260-290rwkw on E85.

Yes I believe something is wrong but not really sure where to start. As I said earlier all I have really changed is the rear muffler (removed cannon and put an xforce twin pipe thing). With my current setup I probably couldn't get any more power to the ground but would like to figure out what's wrong.

GT3040 is the old description (larger comp wheel), or what everyone else calls a GT3082 these days.

So its the larger of the GT30XX family compared to a 3071

Well if thats the case, 0.63 housing should still make a lot more than what he is.

I mean hiflowed standard turbos make more than that.

Interesting the power falls over at about 5,500rpm. Also the dyno only goes up to ~6,200rpm?? Something seems wrong, unless the rpm on the dynosheet is not correct.

Edited by Harey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...