Jump to content
SAU Community

Recommended Posts

Full boost is about 4700rpm in 4th...

Starts to move at 4000 and giddys up by 4500!

Been on to a motorkana already, it's fine apart from really tight stuff (helps with good suspension, dont have to slow down as much :cool: )

All these arguments are boring, got any vids of it at the motokhana?

Got motokhana next weekend and powercruise the week after so should be plenty of videos soon!

If you are lucky there might even be a rod flying through the bonnet in one of them haha

Until then, here are some pics from the last one (was only on 350hp and BP98)...

IMG_0361.jpg

IMG_0413.jpg

DSC_0001.jpg

DSC_0127.jpg

Last one, it's a shit pic but shows the colour nicely :thumbsup:

DSC_0128.jpg

Edited by SimonR32
Haha yeah we need to see the rod through the block. Extra points if you get it on film haha

Where's that khana at? It looks like a shopping centre carpark

It's in the car park of the cycling speed dome plus their practice circle road thing out the back here in perth! It's really tight and a bit shit but still fun :-)

  • 2 weeks later...

If you are going to the trouble of running E42 why didnt you just use pure E85? You still need to go to a random servo each time so I don't really see the advantage, unless you were running out of injector.

edit: just watched the vid, are you running a locker? Cause it seems to understeer bad then power oversteer.

Edited by Rolls
If you are going to the trouble of running E42 why didnt you just use pure E85? You still need to go to a random servo each time so I don't really see the advantage, unless you were running out of injector.

edit: just watched the vid, are you running a locker? Cause it seems to understeer bad then power oversteer.

Don't have E85 on pump over here in WA so have to purchase CSR Sucrogen E85 in 205L drum. Cost is one factor as it's expensive at $550 a drum and also convenience of only having to get one drum to make 400L of fuel :)

It's got a ATS 1.5way, only understeers a little when I push it hard on the gas into very slow corners... Not really designed for motokhanas with the RB20 being that laggy. At speed it handles like a dream :laugh:

Edited by SimonR32
nice work Simon, definately come along way from last i saw of it. I assume you didnt do the paintjob with a paint brush or roller like the black it used to be :) Colour looks awesome, good to see something different for a change.

haha yes it has... Go on antilag and I have a showcase thread of what I have done :laugh:

  • 2 weeks later...

Reminds me of what mine is like to drive in slow corners, but worse. No boost then bang! need moar balls to drive it. It's all well and good to make all that power, but you will never use it in a corner with the lil 20.

I still love my 20 and will continue to work on improving it as much as I can within reason, but sometimes an RB26 is ever so tempting :P

Ok, its on! Have done an exchange with a friend for some parts which means amongst other things i now have some new SARD 700cc injectors. So they can go in with my new fuel rail with full ptfe/braid lines and fuel reg and we can start to see what sort of boost we can screw into my thing with E85 :)

Its on ... IS ON LIKE KING KONG!!!!

Reminds me of what mine is like to drive in slow corners, but worse. No boost then bang! need moar balls to drive it. It's all well and good to make all that power, but you will never use it in a corner with the lil 20.

I still love my 20 and will continue to work on improving it as much as I can within reason, but sometimes an RB26 is ever so tempting :)

Must be in the tune. My thing does not hit that hard and sure as hell doesnt break into wheelspin, a little bit in st but 2nd gear just hooks up ;)

I like the 20 in the corners as it has less torqe to turn the tyres and easier to get on the loud pedal. By corners i mean corners, not silly 120 deg turns on a skid pan, but 70km/h+ corners on a circuit

Edited by Roy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...