Jump to content
SAU Community

Recommended Posts

sorry not real sure which but my car has a hybrid i/c and apexi pod.I thought having a heat shield would prevent hot air from the engine bay, whilst having that extra hole where the standard piping used to be having air directed from there onto the pod.what u reckon or is it pointless

Link to comment
https://www.sau.com.au/forums/topic/34123-heat-shield-ideas/#findComment-685093
Share on other sites

  • 10 months later...
  • 3 months later...

This is how the heat sheild was set up on my last R33 it also had a cold air intake from underneath the front wheel/spoiler and was very effective as you all know how much heat the engine bay produces, im currently making a new one for my new car due to the intercooler pipes being in a different place etc...

The easiest way to get one would be to make it yourself since most cars have a different set up. Its quite easy as im making my second one as we speak.

1.ust take a cut out of cardboard and put it roughly where you want it.

2.Mark all the areas where the pipes are and anything else that is in the way.

3.Cut them out and check it again cutting and shaping it as you go.

4.You can also put bends etc... in the cardboard and tabs etc.. for bolts and so on.

5.Now you have a template, just take it and cut it out of what ever you like(i used 3mm polished alliminium), then bend it up and presto.

It may not fit perfect first time but if you have a real good stencil it should work pretty well.

I also added a little bend to mine to make it look factory.

Cheers hope this helps and if anyone else has some good idea's then lets hear them.

2 ingredients needed for cold air intake.

100-130mm PVC elbow.

Angle grinder.

As was said above u need to make a shield for the barrier, which can be done with some cardboard for template and some aluminium sheeting. Then cut a hole in front left wheel arch and it will be able to sit right behind the bumper. DO NOT CUT STRUCTURAL STEEL, bad plan, minor cutting only.

Or you could buy one that is made for it :P

Your other option is to find some good vacuum hose and mover the whole filter down into the bumper but that might get a little wet on rainy days. You willl still need some sheilding though.

asylum, i uses heat shield, i got a shit load from clark-rubber, they have two types a really think one or just normal, i basicly cut it with a knife and just suck it in there (the car come with like a metal plate which goes over the top),

If you dont have a fmic i have been told it is pointless as there is no direct air-intake as such, basicly your ment to uses the free hole (one which was uses for stock side-mount) and get a PVC pipe and direct the air in through the hole

man i bought one for $150.... i will c if i can find the guys car.... (paul (gtst vspec) its the guy that u gave me the car 4) he lives near bunbry...... they sell his ones at extreme machines for like $700... which is bs....

they are made of aluminium...... side and the top of hte box is also aluminium..... for those that are looking they are for the r33 only but

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...