Jump to content
SAU Community

Recommended Posts

I'll keep this short:

I'm looking to source a genuine R34 GT-R rear wing and I had Blackburn Nissan in Melbourne recommended to me by Japcar in Fawkner. I've emailed them asking how much they would cost and I've just gotten "give me chassis and model number, otherwise we can't help".

Said it before and I'll say it again: I've got very little experience in GT-R's, only the obvious stuff on how they are different to the normal GT/GTT's, not anything specific on numbers...

Now this person at Blackburn has replied, "I am sorry but our parts system works of vin number and when you try and select the one you require it will bring them all and it has to be Japanese translated which we cannot do so with details it is impossible". I only have a vague idea of what a vin number is, my dad pointed it out to me when we had the bonnet up the other day and he pointed out the little blue plate in the engine bay with the paint code and other info.

Yes, I'd say it's a very reasonable request on their part but at the moment it just feels like another obstacle I've run into. I'm sure the genuine wing would probably cost an arm and a leg, but I'd rather take my time and get the real thing over some $300 knock-off on ebay or a fibreglass replica from Carmate.

Any thoughts?

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/
Share on other sites

Shit man, open the damn bonnet and get the number off the tag.

It's also on your rego certificate, your insurance certificate, etc.

Yes, Nissan 'in general' need your VIN. With that they know everything you car was built with, even the transmission, paint colour, and build number.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522373
Share on other sites

Unfortunately the car it's going on is a 25GT, so the vin from that probably won't help.

The alternative to getting a genuine one from nissan is the "GTR-Medium" style of rear wing on Carmate (NSGTR99GTRMEDIUMRW). But I've heard of people complaining about the service at Carmate, something to do with damaged or poorly made goods.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522387
Share on other sites

Unfortunately the car it's going on is a 25GT, so the vin from that probably won't help.

The alternative to getting a genuine one from nissan is the "GTR-Medium" style of rear wing on Carmate (NSGTR99GTRMEDIUMRW). But I've heard of people complaining about the service at Carmate, something to do with damaged or poorly made goods.

Don't places like Ebay show the VIN of cars for sale? Just get someone elses VIN which has the spoiler you want, give that number to Nissan. Eitherway thought yeah it'll be expensive from them.

Lol: I do the same thing when looking at available internet in a new suburb I'll be looking at moving to ;)

Edited by GTRPowa
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522426
Share on other sites

UWISSH: Cheers for that bro, I emailed importmonster.com.au

There was one on their list, but as things are going right now I won't actually be purchasing the wing at this moment but in a month or two, but I wanted to get my research started.

GTRPowa: I did consider trying the VIN of someone else's car. Before I could go looking for one, my dad pretty much put his foot down: "No, no f#%king way you're using someone else's VIN number! You'd be an idiot to do that!"

Wouldn't elaborate, wouldn't give any kind of explanation. I haven't the faintest idea why he got so agitated, is there any security risk of using someone else's VIN?

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522478
Share on other sites

UWISSH: Cheers for that bro, I emailed importmonster.com.au

There was one on their list, but as things are going right now I won't actually be purchasing the wing at this moment but in a month or two, but I wanted to get my research started.

GTRPowa: I did consider trying the VIN of someone else's car. Before I could go looking for one, my dad pretty much put his foot down: "No, no f#%king way you're using someone else's VIN number! You'd be an idiot to do that!"

Wouldn't elaborate, wouldn't give any kind of explanation. I haven't the faintest idea why he got so agitated, is there any security risk of using someone else's VIN?

PM me for my VIN.

I'm probably older than your Dad :ermm:

It's best to stay away from Carmate unless you can do an on-the-spot test-fit; otherwise they're OK.

I'm shortly getting another R34 GT-R from Japan; but it has a large aftermarket rear wing on high metal stems (more like what's on Mark Berry's Superlap car). You might want to buy that off me. :ermm:

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5522650
Share on other sites

1. Don't buy one from Nissan, I gaurantee it would be over $2000+ genuine (I remember reading some where that a factory R34 GTR gear knob was $300 from Nissan!).

2. If you want to know the price, just use a random VIN number off ebay. Your old man is on drugs, all Nissan do is type the VIN number in, look up the part, tell you the price and that is that. You aint commiting fraud and are going to go to jail or something. Here, I even did it for you: 6U9000BNR34002620 There. Done.

3. Buy one from Japan through Import Monster or some one.

Done.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525167
Share on other sites

most used gtr spoilers will fetch around 50,000 yen on yahoo auctions

depending on the colour & if it includes the wing blades

the full "carbon" versions are total rubbish compared to the standard one

they dont even look anything like the original design close up

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525304
Share on other sites

UAS sell replica GTR wings

Also you don't necessarily need a VIN to use FAST, just use model series R34 and look for air spoiler, RB26DETT... I got part number 96030Q

Edited by ichizora
Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5525456
Share on other sites

Finally got my reply back from Blackburn Nissan and had a bit of a giggle when I saw his pricetag: $4589.39

Yeah... I think I'll pass on that.

Cheers for the all the different sources, a lot of them are already looking a lot more viable than carmate.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5536634
Share on other sites

For anyone to be in the state of mind where they would find over 4k a reasonable price, they'd need to be buying it for their Z-Tune or something.

For a N/A Auto 25GT, err no.

Yeah the $695 on UAS for a replica is more in my price range.

Seems a bit of a moot point now, as all I'm likely to do to the car is just source the Nismo rear bar to complete the bodykit set (the one that people call either Nismo or Altia). That way when I sell it I can say it's got the full kit. Plans are to just enjoy this car for a year or two, maybe more and then go looking for something like a nice GTT... But I've also got buddies trying to sell the idea of me getting a 33 GTR.

Link to comment
https://www.sau.com.au/forums/topic/342326-gtr-wing/#findComment-5536829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List: 1.Anna S 2. Luke S 3. Jesse Givens-Lamb 4. Luca Stamatescu 5. Madeleine Stamatescu    
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...