Jump to content
SAU Community

Recommended Posts

Just want to know where people get their tyres for their skyline from in sydney. i quoted a couple of places and they cost about 250 - 300 a tyre. Anyone recommend anyone or place to change your tyres in Sydney. I currently have snow tyres because i imported my car not long ago and i just notice how dangerous it was to drive in wet weather today.

Link to comment
https://www.sau.com.au/forums/topic/342536-cheap-tyres-in-sydney/
Share on other sites

Just want to know where people get their tyres for their skyline from in sydney. i quoted a couple of places and they cost about 250 - 300 a tyre. Anyone recommend anyone or place to change your tyres in Sydney. I currently have snow tyres because i imported my car not long ago and i just notice how dangerous it was to drive in wet weather today.

Honestly, don't get the cheapest ones you can get. I'm currently running Antyres, and they're TERRIFYING in the wet. Spend a bit extra, and get something decent. Given that it's the main thing that makes your car stop/turn, good contact with the ground it always good.

What size are you after? You'll find that there's a lot of decent tyres that can be bought for less than that; I'll be looking at the Federal 595SS soon.

Just want to know where people get their tyres for their skyline from in sydney. i quoted a couple of places and they cost about 250 - 300 a tyre. Anyone recommend anyone or place to change your tyres in Sydney. I currently have snow tyres because i imported my car not long ago and i just notice how dangerous it was to drive in wet weather today.

good tyers are usualy that price if you want cheap but still ok go ask around for NANKANG they are ok and are usualy around $100 - $150 each good for everiday drive and good grip in wet but i would not go to the track with nankangs

Well I have Stock R34 GTT rims so they are 225/45 R17 at the front and 235/45 R17 at the back.

i had 225/50 R17 and 235/50 R17 NANKANG Toursport and i paid $550 for all 4 from KMART they will have to order them in as they dont usualy stock them

held me for about 20000KM fronts and 10000 rears

To be Honest Tempe tyres quoted me on so Kumho KU31 225/45 R17 for about $330 each which is $3 cheaper then RRP and 235/45 R17 cost me $200 each which $9 cheaper then RRP not sure if i spoke to the wrong person. Even bob jane T mart near my work quoted me cheaper.

depends where you are located

call the closest shop for prices from the lists below

http://www.tyreplus.com.au/?dealer&state=NSW

and http://tyresandmore.rtrk.com.au/?scid=23668&kw=4204409

depends where you are located

call the closest shop for prices from the lists below

http://www.tyreplus.com.au/?dealer&state=NSW

and http://tyresandmore.rtrk.com.au/?scid=23668&kw=4204409

Thanks mate will give them a call tomorrow to get some quotes lol, I wish i was loaded so i dont have to worry but, being a student and working part time not going to happen hahaha.

I have to disagree about nankangs, i have 18"/235's on the front and 18"/265's on the back and the rears lose traction in first in the dry and in the wet it's horrific. I'll be going with kumho's next, bit more pricy but I drive regularly from syd to newcastle, and when the rain's pouring you want to be stable at 110km/h.

Not to mention when it's raining EVERYTHING accelerates quicker up hill from the lights. Nankangs are known all over these forums for being pretty terrible. I think part of my problem is the tyre's are so wide and crap that there is no chance of the water being moved from the inside of the tyres.

Gotta say though, they're much better than the sh!t the previous owner put on the car...

I have to disagree about nankangs, i have 18"/235's on the front and 18"/265's on the back and the rears lose traction in first in the dry and in the wet it's horrific. I'll be going with kumho's next, bit more pricy but I drive regularly from syd to newcastle, and when the rain's pouring you want to be stable at 110km/h.

Not to mention when it's raining EVERYTHING accelerates quicker up hill from the lights. Nankangs are known all over these forums for being pretty terrible. I think part of my problem is the tyre's are so wide and crap that there is no chance of the water being moved from the inside of the tyres.

Gotta say though, they're much better than the sh!t the previous owner put on the car...

Firstly, these are a budget tyre, so don't expect them to match a premium tyre.

However, if you're on a budget then these are probably the pick of the bunch

If you were to become a member of SAU-NSW, you'd have easy access to Federal tyres at an AWESOME price - the cost of becoming a member will easily be covered by the savings you'll make. All you'd have to do once your order was in is to wait for them to arrive, then take them to have them fitted to your wheels.

Details in my sig...

To be Honest Tempe tyres quoted me on so Kumho KU31 225/45 R17 for about $330 each which is $3 cheaper then RRP and 235/45 R17 cost me $200 each which $9 cheaper then RRP not sure if i spoke to the wrong person. Even bob jane T mart near my work quoted me cheaper.

The price that TT quoted you may have been for a pair each as I could've sworn I've seen people on SAU quote something like $165 per KU31 from TT which is half of what they're quoted you, so perhaps they did quote you per pair.

And here you go .. Ebay offer from TT http://cgi.ebay.com.au/235-45-17-KUMHO-KU3...9e0dfThat's

So yeah that $330 was definately per pair as that's their ebay shop above and current price is $600 for 4 tyres.

If you were to become a member of SAU-NSW, you'd have easy access to Federal tyres at an AWESOME price - the cost of becoming a member will easily be covered by the savings you'll make. All you'd have to do once your order was in is to wait for them to arrive, then take them to have them fitted to your wheels.

Details in my sig...

What I was thinking, was waiting for you to pimp it ;P

S'where I'm getting my 595SS' from... then it's like $5/tyre to get them put on most places

If you were to become a member of SAU-NSW, you'd have easy access to Federal tyres at an AWESOME price - the cost of becoming a member will easily be covered by the savings you'll make. All you'd have to do once your order was in is to wait for them to arrive, then take them to have them fitted to your wheels.

Details in my sig...

Anyone taking notice??? ^^^

Tyres: If you decide to remain a Non-member, next best is get the best price you can and take it to Blair's 633 Forest Rd. Peakhurst (or Narellan) for your final quote. They even replace faulty tyres without quibble - I know.

Wheels: Don't scrimp on these either. Tempe and Taleb have a massive market you don't know about. They even supply many other outlets. The rims they sell may be pretty, but 99% are heavy. Even the only lightweight rims at Bob/Rod Jane's are the Enkei. It's best to buy lightweight forged rims right here on SAU F/Sale section - I know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...