Jump to content
SAU Community

Recommended Posts

Abandoned my brake upgrade.

Apparently, despite being told otherwise, R33 brakes do not fit all Stageas! :P

Now I need R34 brakes, but I've blown my money on R33 brakes.

Can't be f**ked anymore.

ruby, i'm assuming you are having problems with the caliper mounting bolts being different sizes? r33 is m12 and your car m14?

if that's the case, just get some sleeves machined up (pretty sure you could prob buy them already done somewhere as it's a common issue) that are 14mmOD and 12mmID to fit into your knuckle and use the m12 bolts to fit the caliper :P

all you need to do is find a metal supplier and see if you can buy some 12mm i.d. pipe with 1mm wall thickness

which will have a 14mm o.d.

also, re-bled my fronts, pretty happy with the pedal

all seems good :P stops well now

ruby, i'm assuming you are having problems with the caliper mounting bolts being different sizes? r33 is m12 and your car m14?

if that's the case, just get some sleeves machined up (pretty sure you could prob buy them already done somewhere as it's a common issue) that are 14mmOD and 12mmID to fit into your knuckle and use the m12 bolts to fit the caliper :P

No. Far from it. The legs on the Sumitomo calipers are too short (in radius) meaning even dummying the calipers in place, the 297mm rotors are too large for the calipers suited to them (on the R33). I even toyed with dummying in place the 280mm rotors and the calipers still fouled on the rotors (even when I spaced out the offset).

So the R33 GTST calipers and 297mm rotors have the right offset, but totally wrong radius (by about 20mm); and

The R33 GSTS calipers and Stag 280mm rotors have the wrong offset, and still wrong radius (by about 3mm).

Something to do with the 14mm bolt pattern for the calipers being close to the centre of the hub.

:)

Sounds to me like the R33 calipers you have are actually R32 GTSt calipers.

Nope. Series 2 R33 GTST calipers and rotors. Pulled them off the vehicle myself. Sumitomo calipers are unfinned and rotors are not 280mm, so therefore definitely R33 GTST calipers and rotors.

They do not fit.

Might have found a set of R34 GTT calipers and rotors interstate ... so I'll be f**king off this useless set.

:P

Nope. Series 2 R33 GTST calipers and rotors. Pulled them off the vehicle myself. Sumitomo calipers are unfinned and rotors are not 280mm, so therefore definitely R33 GTST calipers and rotors.

They do not fit.

Might have found a set of R34 GTT calipers and rotors interstate ... so I'll be f**king off this useless set.

:)

the mounting dimensions are the same from 33 to 34 and the actual calliper is very similar (pistons and things)

all that is really different on the 34 callipers is the length of the legs, but its only longer relative to the bigger rotor

eg, 296 to 310 = 14 so the legs would be ~7mm longer

yup i'm also very confused ruby

The basics of it all is:

R33 GTST rotors and calipers are a direct bolt on for series 1 Stagea

R34 GTT rotors and calipers are a direct bolt on for series 2 Stagea

Contrary to what I was told. R33 rotors and calipers do not fit ALL stageas.

Think I'll just leave it and get the 325mm Wilwood kit after all :)

Get some neg camber on that sucker - STAT!! 4mm different offset than mine (+22) and your's is full mexican!

I fitted my bluetooth adaptor for the headunit, so now I can take and make calls without worry of getting busted on the phone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...