Jump to content
SAU Community

Recommended Posts

Thanks for that pick, Nick! I remember you posting it up some time ago and me saving it, but don't remember where it saved.

Chuckie, I might come and have a gander at your's or Bubba's sometime when i'm off cruches!

I'll even take you for a drive.. couple of weeks I should have the LSD in and the adjustable rear upper arms.. then it's skid time! :(

oooh ooohhh let me know too!!!

See above :(

Leaving that till last mikey boy

also need clutch line made up, picking up flywheel next week freshly machined

hopefully get my clutch this week and waiting on my package to rock up containing my sparkly blue dildo shifter

oh and a pair of overalls.....

Leaving that till last mikey boy

also need clutch line made up, picking up flywheel next week freshly machined

hopefully get my clutch this week and waiting on my package to rock up containing my sparkly blue dildo shifter

oh and a pair of overalls.....

Hmmm. . . .dildo and overalls togather sounds like things might get a bit messy!!

Hahaha

it's an entry requirment at kidafa's shed

the overalls that is... Not the dildo...

Oh and getting a muffler put on the stag today

I can't handle the sheer awesomeness of just 3inch straight pipes from the turbo back

will try upload a short video later

serviced the stagea tonight at work, fresh oil, new oil filter and new fuel filter. and since we are a wynns stockist i thought i'd do one of there injector power flush kits and a throttle body clean(why not, they were free) and surprise surprise it actually did make a diference.

my stagea used to hold back when pulling between 4500-5250rpm when its really cold, now it pulls nice and smooth all the way to rev cut! sweet!

i so totally should. but i want to experience the stockness and when i get bored il do mods!

you will want to start the next day they need a bit more go in them..this is what i have

turbo tech boost controller $30.00

exhaust i recommend hks silent good sound

nisstune $800.00 +9.psi boost will go to 11 soon

164 rwkw

next is return flow intercooler and 1 day high flow the turbo

this is a video i found on youtube

same exhaust as mine...

almost looks like a green stag too..

:/

love it

today finally finished off the front and rear 50mm wheel studs. didnt take off the hubs, didnt replace footbrake pads.

needed 50mm extended wheel studs to fit wheels over the 13" 324mm Wilwood brake setup.

about to test drive this arvo - flat battery atm, so charging that up, get some air in the brand new unused KU36 semislicks

fill with fresh fuel, give her a beaut wash to get rid of the gumtree crap all over her, and test the brakes/tyres

fs: 10x front 50m wheel studs, 10x rear 50mm wheel studs, suit Stagea S1. front 13.75 knurl, rear 12.75 knurl - $100

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...