Jump to content
SAU Community

Recommended Posts

got a new turbo to install in my car.... :P

what turbo!?

eyes andy suspiciously ... you havent been to jetwrecks have you ? ;)

argh i got delayed again with my suspension and tyres ..not till wednesday now *sad face*

also what difference did the plenum spacer make Dunc - i should probably invest in one of those and leave it on the shelf for two months also :P

I didnt notice the hugest difference with the fmic on a stock turbo.. in fact during the day a slight bit of lag , but a definate improvement at night.

Edited by PetroDola
also what difference did the plenum spacer make Dunc - i should probably invest in one of those and leave it on the shelf for two months also :P

At the moment, just a lighter wallet - could be because its sitting on my shelf next to me still :P

lol sorry dunc .. same boat as me ,

daleo .. you said it made a good difference yeah? :P

and someone here is making these who is it again.. and is there any left ?

Can i get one pls :P

Edited by PetroDola
lol sorry dunc .. same boat as me ,

daleo .. you said it made a good difference yeah? :)

and someone here is making these who is it again.. and is there any left ?

Can i get one pls ;)

Yeah, bucketloads more torque in the midrange, there's heaps more with my new exhaust, so this is just the cherry, on the icing, on the cake :P . Only had about 40km of diving so far, I'll be driving to work tonight; that'll be a better test.

Jetwreck's your man, but I don't know if he has any left :P .

Yeah, bucketloads more torque in the midrange, there's heaps more with my new exhaust, so this is just the cherry, on the icing, on the cake :P . Only had about 40km of diving so far, I'll be driving to work tonight; that'll be a better test.

Jetwreck's your man, but I don't know if he has any left :P .

Cool thanks .. hope hes got some left :S

yeah the dump and full exhaust mod in one go was the biggest improvement my car has seen in performance thus far.

Went to start mine today - it's absolutely DEAD! The fuel pump wouldn't prime, and the alarm/immobiliser wouldn't even turn off.

The battery is fine, but there must be a major issue with the alarm or something. I drove it on Saturday night, it started fine when I was leaving home, but would barely crank when I went to leave my cousin's to come home again. :) Hmmm, if tomorrow is the same (weirder things have happened), it's time to call Unigroup to see if there's a mobile sparky they can recommend.

what turbo!?

eyes andy suspiciously ... you havent been to jetwrecks have you ? :)

He wouldn't let me near his turbo and yours is a long way away...

I had MY spare turbo rebuilt with a Sierra Stage 1 kit..

It will be interesting to see the difference it makes.

Cool thanks .. hope hes got some left :S

yeah the dump and full exhaust mod in one go was the biggest improvement my car has seen in performance thus far.

PM sent

Edited by Jetwreck

Took the front guard inner lining off to run some wires on the 25G. Down the bottom of the guard back towards the A pillar

was chock full of wet mud, so today cleaned out both sides. There was a good double handfull of mud in both sides that were making a very nice rust inducing enviroment. Had done the RS a couple of years ago.

test fitted my wheels! (18 x 9.5 +20) seem to have heaps of clearance atm as i have bugger all camber dialed in, i may end up running a 5mm slip on on the front to bring them out a bit.

ps. yes there rotas bring on the hate! i couldn't resist them at $999 a set with hub rings and a full set of aftermaket lock nuts.

post-56886-1287477001_thumb.jpg

post-56886-1287477021_thumb.jpg

post-56886-1287477078_thumb.jpg

post-56886-1287477177_thumb.jpg

post-56886-1287477200_thumb.jpg

test fitted my wheels! (18 x 9.5 +20) seem to have heaps of clearance atm as i have bugger all camber dialed in, i may end up running a 5mm slip on on the front to bring them out a bit.

ps. yes there rotas bring on the hate! i couldn't resist them at $999 a set with hub rings and a full set of aftermaket lock nuts.

Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

just a few...

19937d1118609139-issues-hre-wheels-hrea.jpg

Rota%20wheels.jpg

img0192hr3.jpg

rotaposterkq9.jpg

and my personal favourite - the before and after track day photos

rota0ni9.jpg

rotayu3.jpg

seen them all mate really doesn't concern me, believe me its an informed decision it is a daily only car but if they do break I will be the first to post them up. For the same sizes from rays 3-4 grand, just not worth it on a daily.

Edited by horrace
Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

TBH a bit of both, they were shit back in the day, all those pics mike posted are old but people have long memories, there was a guy here on sau recently whos spoke cracked but he was tracking an R35 on full slicks obviously my car is a ton lighter and wont be tracked with slicks.

TBH a bit of both, they were shit back in the day, all those pics mike posted are old but people have long memories, there was a guy here on sau recently whos spoke cracked but he was tracking an R35 on full slicks obviously my car is a ton lighter and wont be tracked with slicks.

Saw that in the SA Wasteland thread, Nightcrawler had a small spat about it :)

Yeah you guys gotta get your facts straight - they were on an R35GTR doing insane lap times for 6 months, then while the brakes/wheels were red hot from many very hard laps he went through a BIG ice cold puddle and one spoke cracked. Any alloy if you heat it up enough and then dump it in freezing cold water will crack. It is not a reason to stay away from Rota's at all, but rather a hefty endorsement that they can take all that punishment.

you'll be right for daily driving i'd say.

a lot of them were circuit racing incidents - plenty of load put on the wheels

there was actually a member on here that stress fractured the rotas he decided to use as track wheels on his r35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...