Jump to content
SAU Community

Recommended Posts

I have. It is made of brick and is commonly termed a garage :P

It is definitely possible to get over 700kms before the light comes on whilst cruising at 100-120kph.

It has been done a number of times and with a favourable road/breeze, 800kms when the light comes on is possible (rare though)

I have a garage to. just my dad and sister seem to beat me to it.

i dont think ill ever get more than 400Ks out of mine. maybe when i lean it out. doubt it though

I have a garage to. just my dad and sister seem to beat me to it.

i dont think ill ever get more than 400Ks out of mine. maybe when i lean it out. doubt it though

I generally get about 400km out of mine also, but on my way to the snow I did 659km from 70.8L of fuel, ie 10.7L/100km.. I think we've got an 80L tank, so theoretically could've squeezed more out but the light was well and truely on at that point. What fuel consumption does your Informeter give you?

I get between 450-550 city and I have got 800 out of one tank kept it at 100-110kph but.. At 120-130kph its about 650..

Installed the new head unit and sub into the cargo storage.. Much better sound now.. Whilst doing that realized the muppets that drilled the holes for the child restraints didnt silicone it properly now I have leaks in the rear area.. So anoying..

I generally get about 400km out of mine also, but on my way to the snow I did 659km from 70.8L of fuel, ie 10.7L/100km.. I think we've got an 80L tank, so theoretically could've squeezed more out but the light was well and truely on at that point. What fuel consumption does your Informeter give you?

to be honest havent set up the fuel consumption on it. the car sayse something stupid like 6.7/100km which i would like if it were true lol

to be honest havent set up the fuel consumption on it. the car sayse something stupid like 6.7/100km which i would like if it were true lol

Unless you've had the english conversion done, the readout is actually in Km/L, not Litres per Hundred Kays, so yours is probably about right.

are you talking about after markets or just new globes? i'm currently using 8000k's although I prefer 10,000k.

as long as you have your lights angled down it shouldn't be a problem!...I drive at night mainly and I never get flashed or pulled over.

Be careful when choosing the Kelvin rating of your new lights - as outlined here, Kelvin rating has little to do with the actual light output. Kelvin is a measure of colour TEMPERATURE, so basically how "warm" or "cool" the produced light is, not how bright.

Unless you've had the english conversion done, the readout is actually in Km/L, not Litres per Hundred Kays, so yours is probably about right.

that would mean i should get 537kms out of the tank though. I need to lean it out i think.

Be careful when choosing the Kelvin rating of your new lights - as outlined here, Kelvin rating has little to do with the actual light output. Kelvin is a measure of colour TEMPERATURE, so basically how "warm" or "cool" the produced light is, not how bright.

^^+10003

couldnt agree more. i remember having an argument with someone at Autobarn trying to sell me these. I had to dumb it down so much by saying lets refer Kalvin as Kandles(candles) having 8000kandles is going to be warmer that 6000kandles. still didnt believe me. i showed him it in the book. why do they hire these people

that would mean i should get 537kms out of the tank though. I need to lean it out i think.

You would if you drove it dry mate.

You should get another 120kms for so once the fuel light comes on (maybe more), but I remember you saying that you only run it down to the 1/4 tank mark?

Bought 3rd set of new fronts seats

have to decide which ones to put in

Evo 8 Recaro's

Brand new bright red Millinium Recaros's

Black Drift R34 GTR copies.

Collecting new engine parts for forged Rb26 swap

Brand new R32 GTR engine wiring harness, Nismo conrods, ACL multi layer head gasket, ARP head bolts, Genuine gasket kit, s/hand spitfires, stock ecu for Nistune. N1 oil pump (might change to Nitto)

next pistons, bearings, maybe new crank, and head parts like valve guides, springs etc and a pair of -5's = 400rwkw and hopefully a high 11 sec :D .

I had to dumb it down so much by saying lets refer Kalvin as Kandles(candles) having 8000kandles is going to be warmer that 6000kandles. still didnt believe me. i showed him it in the book. why do they hire these people

unsure.gif

What youve said confused the shit out of me mate :P Heres how I understand it.. how far off base am I? :D

Kelvin is a measure of heat - think of it as degrees celcius if it helps. Now, when you heat up a piece of metal, it first goes red hot - if you can keep heating it then it starts going yellow, heat it even more then white hot.

Candles is a measure of how BRIGHT something appears, in a darkened room, you light 1 candle - and you'll illuminate the room to a certain extent. Light a 2nd candle, and the amount of illumination increases.

So, the rating of 8000kelvin for a set of headlights is the equivilent to how HOT it is getting which determines the colour (5000, yellow hot, 8000 white hot)

A rating of 1000 Candles for a light is a comparison to how many candles would need to be light the same amount of area.

SO, you can have 5000kelvin 1000 Candle and youd have a yellow light.. or you can have 8000kelvin 1000 candle and itd be quite a white light. Both would illuminate the same amount.

yeh thats a better way of putting it! but this guy is stupid and cant weld. he is an old friend who i think should never have been given a car. the only way he'd understand is if i burnt him with a candle lol

You would if you drove it dry mate.

You should get another 120kms for so once the fuel light comes on (maybe more), but I remember you saying that you only run it down to the 1/4 tank mark?

Yeh your right. i only run it to 1/4 at max. but that when i only get about 250 to 280. 300 hundred is about half way through that last quarter

i bought another M35

Iaiaaaiaiaiain, I bet its got awsome economy.

Ohhh i forgot to mention something.

Bought me an eManage Ultimate today with a universal harness for $676.00 Aud directly from Japan with free shipping.

oh.. its BRAND SPANKING NEW :D

Edited by AaronNM35

Funny noises coming from the front of my car, so I think some coil overs might be needed (either that or some ball joints/bushes are STUFFED) :rolleyes:

Sounds like a piece of gravel is in one of the shocks rubbing up and down as I go over bumps and corners.

Anyone got some coil overs they want to sell :D

I think i'm on my way to around 500K's to 70L (14L/100K)!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...