Jump to content
SAU Community

Recommended Posts

Karl Heinz Urban:

post-78650-0-79236000-1305200266_thumb.jpg

In son of rajab of the Rings played Éomer was adopted together with his sister, Éowyn, by King Theoden of Rohan when their parents died.

Also was in Star trek (2009) and Xena: Warrior Princess (1995)

Same 2.5 litre V6 as the 626, beautiful engine, but when they go wrong; and they do... BIIIG dollars.

i think you will find the Eunos 30X had a 1.8Ltr V6........ we used to own one back in the day when we were in NZ.

i think you will find the Eunos 30X had a 1.8Ltr V6........ we used to own one back in the day when we were in NZ.

Right you are :thumbsup: , the 2.5 didn't have much torque, that 1.8 must need a rev to get going...

Has anyone seen the movie "RED" with Bruce Willis, Helen Mirren, Morgan Freeman and John Malkovich in it? I was watching that and noticed that Jetwreck has a doppelganger in one of the other major roles...

http://www.imdb.com/...08928/tt1245526

http://www.imdb.com/...19040/tt1245526

http://www.imdb.com/...97696/tt1245526

http://www.imdb.com/...66112/tt1245526

Damb....Iv'e been sprung again!....not the first time someone has said that.....apparently I was the Russian Bad guy in The Bourne Identity that died in the car accident as well!!!

Just wish everyone would get it right....he looks like me not the other way around....I was born first!! :P

Edited by Jetwreck

Karl Heinz Urban:

post-78650-0-79236000-1305200266_thumb.jpg

In son of rajab of the Rings played Éomer was adopted together with his sister, Éowyn, by King Theoden of Rohan when their parents died.

Also was in Star trek (2009) and Xena: Warrior Princess (1995)

f**k that shit. He was the DOOM GUY!!!!

Gutted! It looks like I have to go to Sri Lanka for a couple of weeks, leaving on Tuesday... so not only do I miss the opportunity to demolish Robbie on the dyno, but Ryan will probably have his sway bars in before I get mine! Bastards!

your sri lankan?

can i go instead??? lol

:rofl: Mate, Im as white as can be. I find meat pies a bit on the spicey side sometimes :P We (my company) have an office in Sri Lanka, and I oversee some projects that are run out of that office; so Im needing to spend some time there to get a few things finalised :(

:rofl: Mate, Im as white as can be. I find meat pies a bit on the spicey side sometimes :P We (my company) have an office in Sri Lanka, and I oversee some projects that are run out of that office; so Im needing to spend some time there to get a few things finalised :(

damn u.

lol i find some chillies as mild as a meat pie!

i havnt been to lanka in ages! wanna go back :(

Went to a different BP to my standard local, and the attendant was so excited by my car he just about had kittens. You'd think working at a petrol station he'd see a lot of quite nice cars coming through, but he seemed to be compeltely enamored by my stag; he knew what it was - and basically ran out and said "Man that is awesome. That is just cool". Kinda humbling to see someone so enthusiastically positive about your pride and joy :rofl:

Went to a different BP to my standard local, and the attendant was so excited by my car he just about had kittens. You'd think working at a petrol station he'd see a lot of quite nice cars coming through, but he seemed to be compeltely enamored by my stag; he knew what it was - and basically ran out and said "Man that is awesome. That is just cool". Kinda humbling to see someone so enthusiastically positive about your pride and joy :rofl:

Haha atleast when you fill up you don't get yelled at by the caltex attendant saying "no no don't put ethanol in your car it won't work I don't care what you say" true story happened today lol

I should be so lucky. He didn't even offer me a discount on the fuel! Mustnt have liked the car THAT much.

what a sham! he probably said that so youd fill right up.

AAron, thats gold! did you spin all 4 wheels right out of the station to show him that you CAN put E85 in your car?

what a sham! he probably said that so youd fill right up.

AAron, thats gold! did you spin all 4 wheels right out of the station to show him that you CAN put E85 in your car?

Well I sure showed him! I only filled up half a tank; $1.60 was just a touch too much for a full tank.

And LOL.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...