Jump to content
SAU Community

Recommended Posts

Well I'm in Melbourne. Got in last night.

Hotel ends up being a bit average in the rooms, but the staff are really nice and there was a free drink waiting for me on the bar last night :D

Saw Tutankhamen in the museum today, thought it was a bit overpriced but pretty interesting. Got tickets tomorrow night for the Melbourne Gaol Hangmans Tour.

Great spot, short walk to where I'm doing my Google Adwords training, the whole reason for coming over, Lygon Street, the Gaol and the Museum.

Saturday morning is the Aquarium, then heading to Narre Warren. Haven't been to Melbourne with time to see the place in 10 years, so not too bad. Might catch up with Aaron since he has time on his hand, and Jethro if the Silk Roads haven't knocked all of his teeth out :nyaanyaa:

So I guess at the end of it you'll have stronger wrists?

(3 weeks off/nobody around/what to do, what to do?)

umm..f**k YEAHHH!

Well I'm in Melbourne. Got in last night.

Hotel ends up being a bit average in the rooms, but the staff are really nice and there was a free drink waiting for me on the bar last night :D

Saw Tutankhamen in the museum today, thought it was a bit overpriced but pretty interesting. Got tickets tomorrow night for the Melbourne Gaol Hangmans Tour.

Great spot, short walk to where I'm doing my Google Adwords training, the whole reason for coming over, Lygon Street, the Gaol and the Museum.

Saturday morning is the Aquarium, then heading to Narre Warren. Haven't been to Melbourne with time to see the place in 10 years, so not too bad. Might catch up with Aaron since he has time on his hand, and Jethro if the Silk Roads haven't knocked all of his teeth out :nyaanyaa:

yeh man i should be free this weekend.. just give me a shout!

I've just got back from Melbourne, where I was 'lucky' enough to meet Aaron, Scotty and Ironpaw, and go for a ride with Aaron and Ironpaw.

All I can say is WOW. These two cars are pretty serious road cars!

Aaron's was first up, and what I liked most is all the little things that were done, and all the little differences. There was a lot of basic things he'd done on his car that I could do to mine and they'd cost my stuff all. A trip to Jaycar is in order...

The power was impressive but the delivery is even better! Much less lag than mine, it just tears off like a rocket, with so much torque it's incredible! The way it performs manual changes is much improved and pretty savage for an auto. Could almost have believed it was manual... And the noises were cool. Sounded like a performance car, which I liked. Just an all round great car, even if he is trying to nut out a couple of issues.

Ironpaw's, by comparison, didn't seem to have the same power delivery or gearbox as Aaron's. I'm not sure if this is down to the way it was driven, but I think Ironpaw hasn't done the auto valve body upgrade or much else in the way of gearbox? Ironpaw is only 15kW down on Aaron, but it felt like a bit more.

And then we got to a corner. The new Silk Road's are insane! So stiff through the corners that it felt like it responded brilliantly, yet somehow was fairly compliant and dare I say it acceptable around the roads we took. This was the first one I'd been in with coilovers though, so I'm not sure if I'd get this experience from any car with coilovers, but having just fitted sway bars and driven mine (on stock suspension) through the hills, mine pales in comparison to this one.

I think Aaron's power and delivery with Ironpaw's suspension, braking and cornering performance is my new goal. Absolutely brilliant, both of them, in their own different ways.

I very much appreciated the hospitality of Aaron, Scotty and Ironpaw. Never met me before, but took me for a drive in their precious rides, and I even got to see inside Scotty's cave of wonders :worship:

Great to see a couple of the more developed M35s in Aus, and thanks to all involved. Now I better get back to work! MOAR POWAAAAHHHHHHHHHH!!!!!!

I reallllllllly don't wanna know what you kids got up to

lol

I'm sure Scott's wife will agree :nyaanyaa:

And Aaron: Get some good shocks! Seriously!

yeh i will eventually, like i said, i currently have bigger issues to worry about, suspension isnt gonna screw up the engine :thumbsup:

I've just got back from Melbourne, where I was 'lucky' enough to meet Aaron, Scotty and Ironpaw, and go for a ride with Aaron and Ironpaw.

All I can say is WOW. These two cars are pretty serious road cars!

Aaron's was first up, and what I liked most is all the little things that were done, and all the little differences. There was a lot of basic things he'd done on his car that I could do to mine and they'd cost my stuff all. A trip to Jaycar is in order...

The power was impressive but the delivery is even better! Much less lag than mine, it just tears off like a rocket, with so much torque it's incredible! The way it performs manual changes is much improved and pretty savage for an auto. Could almost have believed it was manual... And the noises were cool. Sounded like a performance car, which I liked. Just an all round great car, even if he is trying to nut out a couple of issues.

Ironpaw's, by comparison, didn't seem to have the same power delivery or gearbox as Aaron's. I'm not sure if this is down to the way it was driven, but I think Ironpaw hasn't done the auto valve body upgrade or much else in the way of gearbox? Ironpaw is only 15kW down on Aaron, but it felt like a bit more.

And then we got to a corner. The new Silk Road's are insane! So stiff through the corners that it felt like it responded brilliantly, yet somehow was fairly compliant and dare I say it acceptable around the roads we took. This was the first one I'd been in with coilovers though, so I'm not sure if I'd get this experience from any car with coilovers, but having just fitted sway bars and driven mine (on stock suspension) through the hills, mine pales in comparison to this one.

I think Aaron's power and delivery with Ironpaw's suspension, braking and cornering performance is my new goal. Absolutely brilliant, both of them, in their own different ways.

I very much appreciated the hospitality of Aaron, Scotty and Ironpaw. Never met me before, but took me for a drive in their precious rides, and I even got to see inside Scotty's cave of wonders :worship:

Great to see a couple of the more developed M35s in Aus, and thanks to all involved. Now I better get back to work! MOAR POWAAAAHHHHHHHHHH!!!!!!

I got the same shift kit Aaron did...It think its probably the driver...I'm not as good as chucking my car around as Aaron :blush:

And I haven't done that trans resistor mod....

Dammit I need to get the ATTESSA fixed....I did a few 3k rpm launches last night and all it did was wheelspin and accelerated at a slow ass rate. This was in 2nd, manual mode.

How to launch in 2wd mode? lower RPM?

perhaps the fact it was near hailing last night is why you were wheelspinning.

you can put it in 2wd by dropping the shaft or unplugging the attessa, but it will just wheelspin and you'll possibly die from the mighty pole, or tree.

Dammit I need to get the ATTESSA fixed....I did a few 3k rpm launches last night and all it did was wheelspin and accelerated at a slow ass rate. This was in 2nd, manual mode.

1/How to launch in 2wd mode? 2/lower RPM?

1 = Get a limo

2 = Stall and launch at about 2,500rpm......but without a limo you may still light it up!

3 = You may have to soften or raise the rear of the car slightly so it bog's down

Edited by Jetwreck

perhaps the fact it was near hailing last night is why you were wheelspinning.

you can put it in 2wd by dropping the shaft or unplugging the attessa, but it will just wheelspin and you'll possibly die from the mighty pole, or tree.

Dude my car's already in 2WD mode...the 4WD light is pretty much lit up all the time which means ATTESSA is farked right? Every time I start the car I can hear the pump making chirping noises every 5 sec...

And the weather was fine last night. Was a tad windy but wasn't raining at 9-10pm where I was...

And yeah, the car did want to steer right when I launched it...hmmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...