Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Ever come across some car on the net that made you uncontrollably giggle like a little school girl...?

I had that experience tonight at work. Was surfing along, quiet as at work... then BAM!w00t.gif

modp_1012_01_o+1974_nissan_fairlady_z+front_view.jpg

Rocky Auto S30 with dry carbon panels, a RB30D (yep, 3 litre, with a RB26 head, and 3 duel throat CARBS!)

Now, I've seen Rocky auto stuff featured before, but it hasn't done much for me in the past. Anyways, the car is currently FOR SALE for about 13 million JPY. So if any of you buggers picked up the new years lottery... buy this...NOW!thumbsup.gif

http://www.modified....-z/viewall.html

Edited by PN-Mad

I mean, having to wait for one or two sets of lights.

Blows my commute out from 40 mins to 50 mins. Total bollocks.

Thats completely unreasonable. Id be writing letters if I were you.

I mean, having to wait for one or two sets of lights.

Blows my commute out from 40 mins to 50 mins. Total bollocks.

Thats completely unreasonable. Id be writing letters if I were you.

Rush hour in Adelaide...

Tumbleweed_on_highway162.jpg

1000km run-in service & dynotune on Friday.

Forged bottom end, ported head with Tomei cams, gt3076 highflow, S15 450cc injectors, chipped ecu + tuneable piggyback ---- what boost should I have it tuned to?

I believe the ATS Gt3076iw BB turbo losses efficiency around 21psi.

I'm thinking 18psi should be fine, allowing spikes to 20psi (if that happens).

Don't want to stress the engine tooooo much; might just settle for between 1.25-1.33bar I guess.

Ideally the tuner will just keep ramping it up until there is no return for the extra boost and then set it at the figure thats still giving benefit. Hope you get to keep the car although to be honest they are not cheap to run - I am spending $100 - $120 a week on petrol alone!

True. To keep costs down im thinking tho im best to say X-psi tune thanks. Yeh stuff it, I'll tell them tune between 1.25 & 1.3bar thanks very much, and go from there.

Most likely keeping it, biggest (only) worry is "suspicion of defect" by an over zealous Officer in which case id be reamed big time as I have stuff all stock parts & can't deal with the hassle of inspections while at Uni, associated costs, etc. Only been pulled over once in my ownership for a RBT but admittedly its on my mind a fair bit..... Just the What-If factor.

Dunno what system you have in your state but in NZ there is a Low Volume Vehicle Certificate with an inspection carried out by licensed inspectors (not the police). I just have to get driveshaft loops and then an inspection which costs $400 -$600 and then a certificate stating that all my mods are safe i.e. that the braking and suspension are suitable for (more than) the doubling of stock power, that the seats are properly secured in short that all non oem stuff is fit for the pupose. You also get a plate to go on the bulkhead and then just have to point out the plate and if necessary pull out the certificate if you ever get stopped by the cops.

Dunno what system you have in your state but in NZ there is a Low Volume Vehicle Certificate with an inspection carried out by licensed inspectors (not the police). I just have to get driveshaft loops and then an inspection which costs $400 -$600 and then a certificate stating that all my mods are safe i.e. that the braking and suspension are suitable for (more than) the doubling of stock power, that the seats are properly secured in short that all non oem stuff is fit for the pupose. You also get a plate to go on the bulkhead and then just have to point out the plate and if necessary pull out the certificate if you ever get stopped by the cops.

Yep, we dont have anything like that. If the police pull you over they can send you to be inspected for suspicion of having modified the vehicle even if they know nothing. Read countless stories on SAU about guys having cops point out "Turbo timers" in their engine bays which are actually alarms, etc etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...