Jump to content
SAU Community

Recommended Posts

What an arvo! Thought I'd go get the tyres flipped due to severe inner wear due to the last Clayton place setting the wheel alignment to 8deg toe ? so I went back to the usual tyre shop and they put 2 big splits in the side wall of the tyre while doing it and then tried to say it wasn't them even though they just said it's that bad you can't drive on it as the sidewall was balloning out, then how the hell did I get there on them, then they said they looked fine when they first pulled the wheel from the car, go figure. So after some talks they said they will pay for the new replacement.

Then I get home and check the rims and they have put small scratches and a gouge in all rims ?

For such a simple job I've yet to come across a tyre shop that can do anything without f#cking it up.

The machine clamps on the inside of the rim to get the tyre on or off. Guess they weren't careful.

Sorry to hear, a least you have come to some sort of arrangement.

Yeah just lack of attention and care. Gonna have a go at them tomorrow about damaging the rim lips, can't see anything happening about it though.

*sniff, sniff*

Is that jealousy I smell in your post Alex? I think so. Mmmmm red V35 fronted Stagea...

The black Stagea is full Dolphin PM35 body parts (grill, eye lids, front lip, skirts, rear bar and spoiler). Looks surprisingly good (???!!)

Have started wondering what a Y50 Fuga front end on a Stagea would look like....

That wing is ridiculous though. Not sure if it's the adjustable version, but epically OTT.

Y50 Fuga front end might be ok, if it'll fit. But no one around here would put a different face on their M35, would they? :whistling:

Jealousy of what...?

You like it do you? Its all yours!

I like the black one. Needs a good clean but.

No thanks, that red one burns the back of my eye balls and sears the darkest recesses of my brain

That wing is ridiculous though. Not sure if it's the adjustable version, but epically OTT.

Y50 Fuga front end might be ok, if it'll fit. But no one around here would put a different face on their M35, would they? :whistling:

Only those with an NM35 need consider a facelift.

Oh, and it is highly recommended :)

Why? They're 2 very different cars. Ask your mate how quickly & comfortably he can cart a family away camping for a weekend. He'd be embarrassed 'cause he'd have to drive his mums' camry wagon, lol.

Still, I bet it was a nice experience riding in (driving?) a 10 sec GTR. I admit I've never been in a car that quick.

Why embarrassed?

I stopped comparing my car to gtrs or s15s. There is no point. You have to start of thinking you have a wagon!

I can do say, 80% of what a gtr can do. But I can still carry a couch in the back when I want to, and I don't get stalked by cops everyday. That's a win, to me.

yeah yeah I know I know its a different car...

I guess embarresed might be the wrong term. More "disappointed when I stomp on the accelerator and I don't get pinned to me seat"....LOL

I can help with your addiction... :)

I would prescribe another 100kw to put that smile back on your face, but power costs money and lots of it. (as i'm sure your gtr mate has found out.) And you cant control what you have now... Back driving yet? :P

I can help with your addiction... :)

I would prescribe another 100kw to put that smile back on your face, but power costs money and lots of it. (as i'm sure your gtr mate has found out.) And you cant control what you have now... Back driving yet? :P

So Scotty, when are you joining the 400kW club?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...