Jump to content
SAU Community

Recommended Posts

Yeah at street power levels the extra valve train weight is more than made up for by extra valve area and the fact you have dual cams meaning less compromise with valve timing, however is it possible that at extreme rpm of 10-11k which some of these motors see that the extra valve train loss could become an issue, does anyone know if more or less lift can be achieved with single vs twin cam rbs?

Plenty of twincam RB's at 12000RPM+++

Not sure on the lift though although I woulnd't assume so.

Think about it, at higher flow levels the increased area and variability between INLET and EXHAUST with added tuneability becomes an even greater benefit.

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Think about it, at higher flow levels the increased area and variability between INLET and EXHAUST with added tuneability becomes an even greater benefit.

This is what I would have assumed as well, just trying to get an idea about why the records aren't basically the asme, probably has nothing to do with actual power and more to do with the cars.

This is what I would have assumed as well, just trying to get an idea about why the records aren't basically the asme, probably has nothing to do with actual power and more to do with the cars.

Yeah mate, that's pretty much what I've assumed as well.

I'll throw in my 2 cents here.

I own a high comp Tomei 2.8 with a set of decent cams with a pair of GT RS's hanging off the side of it. After driving a 3 litre with -10s (MarkoR1's) and being in N1GTR's car with a very similar setup I would not even look at the 2.6, 2.7 or 2.8 engines. It almost wants me to throw mine in the bin and build a 3 litre + engine. All that rubbish you hear about "30's dont rev" is exactly that.... a load of crap.

I'll throw in my 2 cents here.

I own a high comp Tomei 2.8 with a set of decent cams with a pair of GT RS's hanging off the side of it. After driving a 3 litre with -10s (MarkoR1's) and being in N1GTR's car with a very similar setup I would not even look at the 2.6, 2.7 or 2.8 engines. It almost wants me to throw mine in the bin and build a 3 litre + engine. All that rubbish you hear about "30's dont rev" is exactly that.... a load of crap.

Don't throw it away Paul; just leave it out the front and I will come get it :P

a block in crappy condition in the us goes for a minimum of 1k in the usa, they average around 2k not including machine work, belt, headgaskt, gaskets, and yadda, bare minumum is 5k for a 3 liter block to be operational in the us, i would just do a 2jz...

shipping a whole engine block would cost at least $500 if not more, $1k is probably a pretty accurate outcome for buying a $100 block shipping it there and some markup to make it actually worth while.

Edited by Rolls
I'll throw in my 2 cents here.

I own a high comp Tomei 2.8 with a set of decent cams with a pair of GT RS's hanging off the side of it. After driving a 3 litre with -10s (MarkoR1's) and being in N1GTR's car with a very similar setup I would not even look at the 2.6, 2.7 or 2.8 engines. It almost wants me to throw mine in the bin and build a 3 litre + engine. All that rubbish you hear about "30's dont rev" is exactly that.... a load of crap.

Agreed. A well built/balanced RB30 can rev to 8 and beyond without rattling itself to pieces.

The head and turbo combo is the key for sustaining power all the way up there though.

Mine is going to 8000rpm maybe more if the head allows :whistling:

sadly i think i will never achieve the 3 liter status, if my stroker 2.7 dies, i am going neo and calling it a day lol, i would love to get a rb30 though the two i have seen were ridiclous.

current mods:

t517z turbos

264 greddy cams

trust front/dump pipes

trust PEII cat back exhaust

trust 720cc injectors

power fc d-jetro

os giken twin plate

basically i wana build the ultimate stagea in all aspects power, looks, interior the complete package and wana make 600 hp+ at least to make the wagon really quick due to its weight, it will be a show then street car. the budget i have is approx. 40k for engine.

If you want to build the ultimate Stagea you will have to go north of 600awkw (not 600hp) to beat Psymin's ultimate Stagea. He used a 2.8 stroker kit but bang for buck Rb30 will get youi there cheaper - see Spool or Proengines or RIPs: http://www.ripsltd.com/
If you want to build the ultimate Stagea you will have to go north of 600awkw (not 600hp) to beat Psymin's ultimate Stagea. He used a 2.8 stroker kit but bang for buck Rb30 will get youi there cheaper - see Spool or Proengines or RIPs: http://www.ripsltd.com/

nissanstageapc151fq690x.jpg

"Click."

Edited by dirtyRS4

thanks for all the ideas and advice i will let you know what happens and i know about PSYMIN's stagea and if i wanted to build the ultimate power stagea i would have to go north of 757kw but thats not what i'm after. I'm after a show quality stagea big custom stereo, custom paint and engine with power to back it up so it isnt all show (which i have yet to see anyone do to a stag PSYMIN being the closest). Thanks again for all the help will keep you posted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...