Jump to content
SAU Community

Recommended Posts

vin#015994 kerry packers silver car. i purchased from nick ross himself and vehicle still has orig plates and delivery receipt. klms are 54k with books filled out with kevin. hope this fills a gap

thanks joe

thanks for the vin number as this car has been accounted for, i'll add the vin to it!

Red Pearl Metallic (27):

1. 8/91, 53 of 100 (#16907), QLD plates OZR32, owned by RBNT

2. 5/91, 27 of 100 (#16070), NSW plates GTR100, owned by AUSSIE_DELIVERED_R32_GTR

3. 8/91, 72 of 100 (#16930), VIC plates, owned by ZARDOS

4. 77 of 100 (#17161), VIC plates, owned by MAZ

5. With Hollandia sunroof

6. Mark Skaife's GTR as seen at the NSW Club, Gibson modified

7. Kerry Packer's GTR, NSW plates AZ?97H, sold privately, heavily modified

8. 6/91, 37 of 100 (#16117), WA plates, owned by jun 2.7

9. Former Linfox Transport Targa GTR #720 raced by Kevin & Peter Bartlett, 6/91, (#16141), QLD plates 151HHZ, owned by John_AUSGTR (prior plates were VIC EXD441)

10. NSW plates CHN032

11. As per magazine article, NSW plates ANO84F

12. Targa GTR #832 raced by Jim Richards & Barry Oliver

13. With NOS kit, NSW plates DIG04U

14. NSW plates SYNRGY

15. NSW plates KNETIC

16. Hills area of Sydney, NSW plates

17. Carlingford area of Sydney, lady driver, NSW plates

18. 18inch gold Simmons wheels, QLD plates

19. GMS race car no.1

20. 93 of 100, Sydney, Autosport customer

21. 36 of 100 (16107), VIC plates GTR500

22. Mark Skaife was given a GTR by Nissan

23. Jim Richards was given a GTR by Nissan, used in Targa Tassie a few times, colour coded Simmons wheels with bigger brakes. Former GMS mechanic stripped the brakes off the car and getting it ready for sale

24. QLD plates ONBAIL & now replaced with GDZILA, 447kw, T66 low mount setup with roll cage, 18” BBS LM gold wheels

25. Kier Wilson owned GTR, SA plates BB555D

26. Published in magazine in a handling test comparison with supercars, trade plates 25A1500

27. 76 of 100 (#17039), registered in VIC

Black Pearl Metallic (17):

1. 5/91, 21 of 100 (#16045), NSW plates ASU66U, owned by GTR FAN

2. 8/91, 78 of 100, VIC plates NURVUS, owned by GODZILA

3. 5/91, 14 of 100, QLD plates 322GTR, owned by brad_gtr

4. Tarmac Rally GTR

5. Parramatta area of Sydney

6. CRD built GTR with 1000+hp, ACT plates JUN

7. 5/91, WA plates GTR091

8. 5/91, NSW plates ABA20G

9. 1992 Australian Touring Car pace/safety car

10. 19 of 100, Sydney, Autosport customer

11. 87 of 100

12. Kerry Packer's GTR, gave to his friend, heavily modified

13. VIC plates OZGTR as seen at the Nats 2006

14. Jim Richards published article comparing factory GTR to Winfield GTR, VIC plates starting with ‘KB’

15. (#15973), likely Kevin Bartlett car as it was modified with roll cage, owned by GTROB

16. (#16034), advertised on shannons website, lot 10

17. advertised on shannons website, lot 9

Jet Silver Metallic (6):

1. 8/91, 60 of 100 (#16942), NSW plates GO21LA, owned by Marko R1

2. Kier Wilson of Willall Racing's 8.7sec GTR with 1000hp, WA plates RH9

3. Brisbane area, not registered and driven anymore

4. Kerry Packer's GTR (#015994), he gave to his helicopter pilot who saved his life after heart attack (Nick Ross), heavily modified

5. As seen in the published track test @ Eastern Creek, NSW plates AEL16K, gunmetal grey Enkei wheels

6. 22 of 100 (#16048), VIC plates DWS, owned by smithy2167

7. 5/91, QLD plates NO1GTR, owned by Dazmo (chassis number does not exist on the build date list, 6F4KBNR32A0011273...11273)?

Racing livery colours (6):

1. GMS race car no.2

2. GMS race car no.3

3. GMS race car no.4

4. GIO race car no.1

5. GIO race car no.2

6. Blue & green Falken promotion GTR

vin#015994 kerry packers silver car. i purchased from nick ross himself and vehicle still has orig plates and delivery receipt. klms are 54k with books filled out with kevin. hope this fills a gap

thanks joe

hi joe - now that you are the owner of this gtr, can u confirm if it is in fact heavily modified?

I've had my black 732 one for about 7 years. Used to be on SAU a lot, most of the old crew will remember this car.

Pretty modded, resprayed, deleted side repeaters (yes they are 300zx items), deleted roof antenna.

pics in my gallery.

gallery_1486_103_25151.jpg

gallery_1486_103_1300890.jpg

gallery_1486_103_415979.jpg

gallery_1486_103_1203207.jpg

Vic Show & Shine best R32 in 2007.

It's due for another respray in the next 3 years or so.

Ronin..more pics. I do love your R32

i agree - more pics!

u have definitely modified it with good taste!

what have u done to the headlights, did u respray the reflective silver lining black? they look very different

It is a mint car. ylwgtr2 did an amazing job on a top shelf paint job. Has custom head lights with Honda HID lights and chrome covering stripped. AP 6 pots on 355x36mm thick rotors make a gun brake setup. Ohlins remote reservoir shocks. 350awkws in leather Recaros. It is about the best R32 GTR getting around. Just needs bronze CE28s or TC105 Weds :)

Thanks Roy. What he said. The headlights I modified, see this thread.

The specs i can remember are

Body

Deleted antenna, side repeaters

Nismo side skirts

Garage Saurus c/f lower front lip (not fitted)

R34 GTR wheels

HID headlight retrofit

Engine

2860-5 garretts

Race Radiators rad

ARE 90mm intercooler

Greddy hard pipe kit

Factory airbox

Sard 700cc injectors

Bosch 044

Tomei manifolds

Racepace modified Trust dumps

Racepace 90mm exhaust

Racepace catch can

Nismo twin clutch

Suspension/Brakes

AP 6pot front, 355x36 rotors

Brembo 2pot rears, 322 rotors

Ohlins remote reservoir coilovers

Noltec front upper arms

Cusco front castor rods

Cusco castor brace

Nismo strut brace F&R

Cusco rear upper arms

Ikeya Formula rear traction rods

Tomei Hicas lock

Whiteline F&R bars

Interior

Recaro Pole Position leather fixed

Takata 5pt harness

Defi boost/oil temp/water temp/oil press gauges

Paint is looking a bit more tired these days, one day when i get a garage I'll spray it again and put it away properly!! And roy, I think CE28s or Enkei RP-F1s will get a look in next time it gets a lick of paint. I would even consider an obscene wheel colour like pink or bright green for shits and giggles.

Edited by Ronin 09

Oh and I would suggest someone mould the rear number plate surround; Nissan discontinued it years ago and there is no more stock.

If anyone gets hit up the bum you'll need to get the part made. I would be happy to invest in a spare fibreglass replica if anyone wants to make a mould...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...