Jump to content
SAU Community

Recommended Posts

It's pretty much a fantasy game... cars can't follow eachother in f1.

Also kimi did pretty well in mclaren when they were cairly ragged cars to drive, compared to the composed renaults. Maybe the flying finn could bring some progress to the flailing williams team...

I had been wondering if Barrichello would make his 20th season, he is thrashing Maldonado in the points though (4-1 lol), and he was driving almost as well as Button for Brawn. Frank Williams said, when Barrichello joined their team, that Barrichello was a world champion quality driver.

wtb stream link yo.

Looks like a circuit rbr would dominate with lots of high speed corners great for all their aero. rbr up until recently just always had that better downforce with less drag thing owned. Will show us if the macs have cought up or are just better at working in the drs zones/gearing.

speed trap would be force india and Mercedes? pretty low drag, lots of power. definetly the mercs to show up strong with all that dragway stuff. the fez in the twisty low speed stuff.

Harder tyres are allocated for India than previous results, the fuzz might be in trouble on the harder compound. The softer compound tyres in the last few races have flattered the ferraris results somewhat. Be Interesting to see if they've solved that particular problem

But the highlight so far is Chandhok almost wiping out a Williams in the pit lane

Edited by ctjet
Lewis Hamilton and Sergio Perez have been handed grid penalties for the Indian Grand Prix.

Both drivers will be relegated three places on the grid for Sunday’s race.

The stewards judged both had failed to slow sufficiently when passing double waved yellow flags at the end of the first practice session.

lol, this kid just cant catch a break this year

Hope this doesnt ruin the race, Louie has been looking pretty racey lately. Looks like Vettel was just handed pole and a very nice clear track to run away on again. Shame

The green light versus yellow flag mix up seems like a good opportunity for arguments from the get go this weekend

At low speed with the front wing flapping up and down?? They have to be testing 2012 parts surely..

Lewis must be like 'Can we fuvking get to 2012 already?'

He has gone past denial, past anger, past depression I reckon he is in acceptance now...bring on 2012.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...