Jump to content
SAU Community

Recommended Posts

yes, but hazzard a guess I would say 280-290rwks max on 98.

would have awesome snappy power on a 25 though

yeah thats what im hoping, if you have to get a new manifold though it would be the 67 for sure..

I tried to fit my t67 on the stock manifold just to see if it would fit but it was hitting engine mounts and A/C lines looked like alot of work and bordering on impossible.

Are you going to plumb the gate back into the exhaust?

See what happens..might try a screamer initially just cause I never had one before..lol.. Is yours..??

there was that T67 that had the smaller comp cover...they dont have any for sale now..

yeah so keeping in my mind on an rb25 you will ideally want the 10cm(.73) rear on all EG variants..all you really need to know is 20g for low mount or 25g for top mount..everything else isnt really too important..

Just trying to simplify it cause there is just too many variants...

It will be great to see the 20g and a gate hung off the stock manifold, with all due respect I think it will give hypergear a real run for his money.

It must be said tho, if you are looking for the simplest street orientated option I would stick to the HG. Being externally gated and proven capable of very high flow I would want the Kando for anything that will do some serious track time. No disrespect to HG but I would say for a hard tuned motor the Kando's will be a little more resilient to EGT.

Yeah that's why I'm going to give it a shot it going to be street driven but also taken down the track a fair bit

Yeah thats the thing, the HGs are great these days but we have seen they do get hot. Im confident the 20g will give the current good HGs a very good run for their money for spool/power but will definitely handle the heat a lot better.

The benefit to the HG is having it bolt up to most of the expensive stuff (manifolds and dumps).

GL, I rekon you will have a kick ass setup.

Haha yeah DVS jez kit a off the shelf kit I couldn't get a off shelf kit for rb25 in a Vl so I bought a vlt kit and drop saw and away I went made my own

Gtscott how'd you blow microtech wired up wrong?

Gtscott how'd you blow microtech wired up wrong?

You need to be careful with the bloody thing, its pretty weak electronically. What I did was short the ground on my VCT solenoid which is plugged into the vactory ecu. This caused a 12v spike to the stock ecu which is only earth switchable so the stock ECU spiked just about everything and blew its fuse.

When the stock ecu spiked it send a spike down the CAS trigger which the microtech piggyback's onto which fried my injector drivers.

I now have spark but no fuel. Microtech were pretty good about it though, should be able to fix it under 200 if I cant fix it myself. I think its likely to be the earth track for the injector drivers so ill just solder a wire in myself (havent opened it yet).

Careful not to over voltage any of yours inputs coz they do not like it lol.

probably a good thing, microleb for the lose.

ROFL imagine an army of microlebs! Shu Microcuz's! (nobody take offence im a big bad dirty wog myself)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...