Jump to content
SAU Community

Recommended Posts

alot of plp say the cheapy ebay manifolds cause boost control issue, but lets wait and see what Jez finds out.

try changing to a stiffer wastegate spring as well.

hopefully it can crack 300 mark with E85.

dam if so, looks like it won't make near 300 on 98 :(

I was on my phone and didn't realize it it was at 12 psi

this may sound like a dumb question but how do i read that dyno chart JEZ i have only seen the dyno dynamics ones which seem easier to read i gather the very top line is boost but its still a tad confusing

Edited by luvpsi

I'll post before he does car feels wicked to drive very responsive. eBay gate is no good put my turbosmart gate on running 13 pound creeps to 15 great turbo. Jez can say the number it's just running gate pressure has a very fat torque curve kando you did it again

Edited by Bsa

No boost controller, 35mm turbosmart gate courtesy of BSA. Boost creep from 11-15 (need a 44mm gate) power and torque just kept climbing. And thats with a missfire from the coilpacks. Will get some split fires but for the time been im going to drift it on thursday before i do any more mods such as a bigger and better gate and a decent boost controller. I think with a flat 20 psi this thing will be even more insane.

I cant believe the torque didnt ever nose over,

Ok the top line is AFR

2nd line is power

3rd line is torque

4th green line is power kw

Sorry about the RPM i was revving to 7000 roughly.

EDIT: this is WITHOUT VCT. As i dont have a speed signal connected yet

d7fe3247.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...