Jump to content
SAU Community

Recommended Posts

Sure can buddy. Im hoping to be back on the dyno early next year. About to order a new 38mm tial gate with 14psi spring. Then i will use a bleed valve from there to up the boost.

Nismo Plate kit for my GTR diff is needed and only $300 i think its a better/cheaper option than a 2way

Remember that Jez's kit up is based around being budget orrientated, so Im sure theres a monetary decision involved in getting the 38 over the 44.

Jez I think you should get the 44 mate, do it once do it right.

Honestly i am just lazy in the way i dont want to pull the manifold off to cut the flange off. Unless someone has a 44mm 2 bolt wastegate. Plus i love the sound of smaller gates. Alot crisper note

Whats the next good value wastegate brand apart fro tial? I know u dont wana skimp on a critical component like this, just want to know what is cheaper and something thats proven like tial?

I got my Turosmart Compgate-40 for $330 which is fairly cheap. It wasn't so much about money for me as performance and compactness.

38mm gate doesnt sound big enough? But then I dunno much about ext gate setups except that most r using 44mm so kinda surprised, as even trent said that 40mm is the min he will go

Explain how u think the sound of the gate isnt big enough Ron

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...