Jump to content
SAU Community

Recommended Posts

An update on my TD05H-18g adventure:

Installed the Kando T518Z copy today on a SR20DE+T along with a Kando SR20 manifold. The manifold was really high quality for what its worth, changed the entire sound of the car now. The TD05-18g went on without any drama, replacing the OEM S14 T28. All lined up perfect ETC.

The driving experience surprisingly has not changed dramatically. Under 2000rpm there IS a notable loss, however you only notice this when creeping away at those revs. Any level of spirited drive has a near lossless experience.

I would say the T28 is entirely progressive in its delivery, packing its best punch just before 4000rpm. The 18g seems to have equal effect from 2000rpm to 3000rpm, from 3000 to 4000 you get a significant increase in pull from the T28 and at roughly 4000rpm the power comes in thick and strong with a 'full song' effect.

I am very impressed with it so far, am very much looking forward to the full tune with double the boost.

What power are u hoping for Jase?

I have an S14 thats looking to upgrade from stock. Maybe this is what he needs.

Being Nistuned by Unigroup for this one, expecting to see 240rwkw BUT am hoping for over 250.

Have seen a couple of these doing 240rwkw with very respectable boost (16-18psi). As you know Im pretty gung ho so Im going to have them turn up the whick on this one until it starts to cap off.

I would put it as a little laggier than a disco, yet making GTRS power. For the record the delivery absolutely shits all over a GTRS and I'm expecting it will make the same power.

well to give you a idea i had a kando td05h18g on my 180sx sr20det non vct tuned by unigroup on 19psi by 4200rpm and made 231rwkw

^^^thats sounds like HKS 2530 numbers, response samish aswell

cheers

darren

Really? I get the same boost response and more power from the bigger TD06-20G on an RB20 and people are forever telling me the SR spools turbos better then the RB20

Well its typical to what i have personally done and seen on others..Rb20 wise i have no idea, haven't had anything to do with them, i don't even like Rb25's..lol, to laggy... i like

sohc forklift motors..lol

cheers

darren

Edited by jet_r31

What gear and what boost?

This is an old dyno sheet of an old tune...but paints the general picture. This is without en EBC, just straight off the gate with a bleed

med_gallery_462_50_171164.jpg

But generally speaking I make over 200rwkws from 4,500rpm and in 4th gear the gate opens at 4,000rpm

well to give you a idea i had a kando td05h18g on my 180sx sr20det non vct tuned by unigroup on 19psi by 4200rpm and made 231rwkw

Well they better be ready to man up because I want more than that lol

was the 8cm i reckon on a few more psi of boost and it would of cracked 250rwkw but i didnt try as i only had 555cc injectors and had it up to 237rwkw same boost but tuner finished up on 231rwkw and it backed it up at wsid quarter mile running a 12.5 at 117.9mph with a shit 60ft of 2.19

when i changed it had barely any preload on the actuator so thats why it was a bit lazy on to boost

so its definately very similar in power output to a t518z which its the same as

my brother made 240rwkw on 21psi but with the greddy t518z

so if you really want to crack 250rwkw be willing to run above 20psi the suggested boost is 1.5bar anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 😏
    • Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
×
×
  • Create New...