Jump to content
SAU Community

Recommended Posts

dude its stainless Steel. the shininess advertises itself.

its quietened down over the week.. really not so loud anymore. i do like the sound noow.

but now to tackle this boost issue. :(

Did any RS models come with LSDs? Havent put it on the hoist to check if I have an LSD or ATTESSA yet...

Got my Blitz panel filter last night, so plugs and air filter going in tomorrow before I head down to the local craft brewery to watch the taxi racing.

Yup, HICAS equipped models got LSD.

thus all ARXs have LSD. Any RS or AXIS with HICAS will have LSD. RX will never have one as HICAS wasnt an option.

PRTechnology (Porsche tune shop). They made up a jig for the dump/front pipe, so im guessing they will sell a few! I will keep you posted. :thumbsup:

Love it. Bends or no bends, it looks like a nice bit of gear. PM me the price?

Yup, HICAS equipped models got LSD.

thus all ARXs have LSD. Any RS or AXIS with HICAS will have LSD. RX will never have one as HICAS wasnt an option.

So povo pack, and luxo barge models got one (with HICAS), but the best model didn't...?:wacko:

My ribs hurt... Craig might have to install my LSD...:ph34r:

In Other news- PNM35 travelled to Orange and back today - about 520kms 3 ppl, shit in the back. Did 10.4km/L on the screen, on track for about 750kms out of the tank- Bells line of road- so plenty of hills.

Much enjoyed Sway bar handling, but some of the bumps on the road hurt my ass- def time for a re-asphalt.

Nice. Will have to hurry up and get it on a hoist to check then.

In other news, car has a pretty loud turbo whistle that wasn't picked up during inspection. Was going to get it balanced, but the turbo guys have suggested it wouldn't be worth it, and go for a stage 2 or 3 rebuild instead. Stage 3 sounds like the way to go, but they won't do it until I've upgraded the fuel system and intercooler. Guys seemed to have a fair idea about M35s, a lot of what they said matched up to what I've read on here.

So guess I'll put up with it being noisy for a while until I've upgraded everythimg else. Just annoyed that I had the car inspected by people who were supposed to know the cars and they didn't even identify an obvious issue.

/end rant

Nice. Will have to hurry up and get it on a hoist to check then.

In other news, car has a pretty loud turbo whistle that wasn't picked up during inspection. Was going to get it balanced, but the turbo guys have suggested it wouldn't be worth it, and go for a stage 2 or 3 rebuild instead. Stage 3 sounds like the way to go, but they won't do it until I've upgraded the fuel system and intercooler. Guys seemed to have a fair idea about M35s, a lot of what they said matched up to what I've read on here.

So guess I'll put up with it being noisy for a while until I've upgraded everythimg else. Just annoyed that I had the car inspected by people who were supposed to know the cars and they didn't even identify an obvious issue.

/end rant

did you buy from a dealer or private sale?

Stage 3 isnt a great option, Aaron has boost spike issues with his. I went stage 1 on mine. If you go too laggy you will need to run a high stall converter when you build the box.

There may be a better option soon if you want to run an off the shelf Garrett. :whistling:

Nice. Will have to hurry up and get it on a hoist to check then.

In other news, car has a pretty loud turbo whistle that wasn't picked up during inspection. Was going to get it balanced, but the turbo guys have suggested it wouldn't be worth it, and go for a stage 2 or 3 rebuild instead. Stage 3 sounds like the way to go, but they won't do it until I've upgraded the fuel system and intercooler. Guys seemed to have a fair idea about M35s, a lot of what they said matched up to what I've read on here.

So guess I'll put up with it being noisy for a while until I've upgraded everythimg else. Just annoyed that I had the car inspected by people who were supposed to know the cars and they didn't even identify an obvious issue.

/end rant

Turbo whine is normal....just make sure you keep good oil up to it!

To go to a stage 3 setup you will need about $6,500 to get it working properly.....and that's before you touch the gearbox!....and that's also providing you do most of the work yourself!....on the bright you will be pushing close to 300AWKW's on BP!

Turbo whine is normal....just make sure you keep good oil up to it!

To go to a stage 3 setup you will need about $6,500 to get it working properly.....and that's before you touch the gearbox!....and that's also providing you do most of the work yourself!....on the bright you will be pushing close to 300AWKW's on BP!

and that provided if you want the turbo to only come on at 5k rpm

I bought it from a dealer, but other than that thr car seems mint, happy with it.

Put the air filter in and removed the inspection plate, seems to pull harder. Love driving the thing every time I go out!

had the car in for a tune today as did scott

i made 275KW atw with 800 nm of torque on pump 98

and then did a tune with the same power on e85, to make it safe.. with 900nm, when i get the box built ill do a proper tune on e85. oh yeh the box holds fine :)

preeettty happy. ill put up a sheet tomorrow of 98. didnt get an e85 one i dont think. :(

or scott can if he has em. lol

had the car in for a tune today as did scott

i made 275KW atw with 800 nm of torque on pump 98

and then did a tune with the same power on e85, to make it safe.. with 900nm, when i get the box built ill do a proper tune on e85. oh yeh the box holds fine :)

preeettty happy. ill put up a sheet tomorrow of 98. didnt get an e85 one i dont think. :(

or scott can if he has em. lol

your top speed must be awesome in that thing!!!! :P

Good figure bud....well done!.....I still would have thought you would crack the 300AWKW's though!....what PSI?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...