Jump to content
SAU Community

Recommended Posts

Take your word for that info Cam. There wasn't a great deal of info on the listing. Is that info straight from mines?

You probably already know but I left the wiring diagram books with Aaron for you to collect and borrow.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

in my car. if scotts not working tonight ill drop em at his.

i doubt it, if it detects connection while the brake is applied theres not point in having it.its best and easiest to have a momentary switch

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

lol your missing something.

This also restricts throttle a few moments after braking, so if you come out of a corner, and want to give it a little squirt, it will be the same as stock.. which kind of defeats the purpose.

its not so much the knowledge of electronics.. this ecu is just fkn smart!

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

Haha, I think you are confusing me with someone who is genuinely SMART lol. But you're right, even if I knew how to build circuits that took all these inputs into consideration, I still wouldn't bother when a switch is so simple & effective.

It would be a different story if the fault code was thrown after 30 minutes or 15kms, but I've had mine open circuit for many days at a time & never caused an error.

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

out of pure lazyness. plus you never have to worry about seeing the CEL for that issue.

ill check the jaycar kits for something like that. i need to get a few 12v to 12v regulated power supplies for some stuff im gonna throw in the car :)

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

My theory is (& it's just a theory):- If you leave everything stock & sloppy - no knocks & bangs. As soon as you start adding swaybars, coil overs etc, all the extra stress buggers the rubbers/bushes/tie rod ends etc. It's a vicious cycle this upgrade game.

So just replace everything with nolathane?

I don't think it's that easy. On the 1600 I have replaced all the rubber with nolathane, but have been very careful to base my replacements on the density of the urethane and how it correlates to the rubber.

Some urethane is too hard, and you have to specify a softer version. The other difference between rubber and urethane is the compression. Urethane is more linear and rubber is more exponential. (I think I got that around the right way? - it's been a while).

Also you have to make sure you grease them up properly otherwise they will squeel and graunch.

I am running SuperPro on everything except for the diff moustache bar (Whiteline) and Nolathane on the castor bar/radius rods. These particular bushes available (not the brand) are softer in durometer than the superpro bushes. Fortunately I have a friend who used to work in the automotive industry and he had a fair amount of experience in bushings for driveline.:thumbsup:

depends on how much??

fixed the knock in the rear suspension, turns out the locking ring hadnt been done up and the strut was slowly unscrewing itself. problem solved! also reset the rear height, gave the springs some preload, so much better now. gotta do the fronts next.

i think the front knock is actually a groan and its the new poly bushes are not greased up enough :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...