Jump to content
SAU Community

Recommended Posts

Take your word for that info Cam. There wasn't a great deal of info on the listing. Is that info straight from mines?

You probably already know but I left the wiring diagram books with Aaron for you to collect and borrow.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

in my car. if scotts not working tonight ill drop em at his.

i doubt it, if it detects connection while the brake is applied theres not point in having it.its best and easiest to have a momentary switch

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

lol your missing something.

This also restricts throttle a few moments after braking, so if you come out of a corner, and want to give it a little squirt, it will be the same as stock.. which kind of defeats the purpose.

its not so much the knowledge of electronics.. this ecu is just fkn smart!

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

Haha, I think you are confusing me with someone who is genuinely SMART lol. But you're right, even if I knew how to build circuits that took all these inputs into consideration, I still wouldn't bother when a switch is so simple & effective.

It would be a different story if the fault code was thrown after 30 minutes or 15kms, but I've had mine open circuit for many days at a time & never caused an error.

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

out of pure lazyness. plus you never have to worry about seeing the CEL for that issue.

ill check the jaycar kits for something like that. i need to get a few 12v to 12v regulated power supplies for some stuff im gonna throw in the car :)

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

My theory is (& it's just a theory):- If you leave everything stock & sloppy - no knocks & bangs. As soon as you start adding swaybars, coil overs etc, all the extra stress buggers the rubbers/bushes/tie rod ends etc. It's a vicious cycle this upgrade game.

So just replace everything with nolathane?

I don't think it's that easy. On the 1600 I have replaced all the rubber with nolathane, but have been very careful to base my replacements on the density of the urethane and how it correlates to the rubber.

Some urethane is too hard, and you have to specify a softer version. The other difference between rubber and urethane is the compression. Urethane is more linear and rubber is more exponential. (I think I got that around the right way? - it's been a while).

Also you have to make sure you grease them up properly otherwise they will squeel and graunch.

I am running SuperPro on everything except for the diff moustache bar (Whiteline) and Nolathane on the castor bar/radius rods. These particular bushes available (not the brand) are softer in durometer than the superpro bushes. Fortunately I have a friend who used to work in the automotive industry and he had a fair amount of experience in bushings for driveline.:thumbsup:

depends on how much??

fixed the knock in the rear suspension, turns out the locking ring hadnt been done up and the strut was slowly unscrewing itself. problem solved! also reset the rear height, gave the springs some preload, so much better now. gotta do the fronts next.

i think the front knock is actually a groan and its the new poly bushes are not greased up enough :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...