Jump to content
SAU Community

Recommended Posts

Take your word for that info Cam. There wasn't a great deal of info on the listing. Is that info straight from mines?

You probably already know but I left the wiring diagram books with Aaron for you to collect and borrow.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

Yes, straight from Mine's, via alot of back and forth with Jesse (sorry Jesse :)).

Thanks for the diagrams, hope to get them from Aaron soon.

in my car. if scotts not working tonight ill drop em at his.

i doubt it, if it detects connection while the brake is applied theres not point in having it.its best and easiest to have a momentary switch

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

I was thinking for the guys(me included) that aren't worried about stalling the car up, this might work. This way it would connect/reset when brake applied then disconnect when brakes released and throttle limit deactivated and away you go. Or am I missing something? I'm a little new to electrics/wiring.

lol your missing something.

This also restricts throttle a few moments after braking, so if you come out of a corner, and want to give it a little squirt, it will be the same as stock.. which kind of defeats the purpose.

its not so much the knowledge of electronics.. this ecu is just fkn smart!

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

Haha, I think you are confusing me with someone who is genuinely SMART lol. But you're right, even if I knew how to build circuits that took all these inputs into consideration, I still wouldn't bother when a switch is so simple & effective.

It would be a different story if the fault code was thrown after 30 minutes or 15kms, but I've had mine open circuit for many days at a time & never caused an error.

but who would go through the trouble of that? lol if commsman doesnt, i dont think anyone will.

out of pure lazyness. plus you never have to worry about seeing the CEL for that issue.

ill check the jaycar kits for something like that. i need to get a few 12v to 12v regulated power supplies for some stuff im gonna throw in the car :)

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

i got a knock in the front steering. either i didnt do something up tight enough (crappy rattle gun) or a tie rod end is on the way out. i hope the spare is in decent nick!

My theory is (& it's just a theory):- If you leave everything stock & sloppy - no knocks & bangs. As soon as you start adding swaybars, coil overs etc, all the extra stress buggers the rubbers/bushes/tie rod ends etc. It's a vicious cycle this upgrade game.

So just replace everything with nolathane?

I don't think it's that easy. On the 1600 I have replaced all the rubber with nolathane, but have been very careful to base my replacements on the density of the urethane and how it correlates to the rubber.

Some urethane is too hard, and you have to specify a softer version. The other difference between rubber and urethane is the compression. Urethane is more linear and rubber is more exponential. (I think I got that around the right way? - it's been a while).

Also you have to make sure you grease them up properly otherwise they will squeel and graunch.

I am running SuperPro on everything except for the diff moustache bar (Whiteline) and Nolathane on the castor bar/radius rods. These particular bushes available (not the brand) are softer in durometer than the superpro bushes. Fortunately I have a friend who used to work in the automotive industry and he had a fair amount of experience in bushings for driveline.:thumbsup:

depends on how much??

fixed the knock in the rear suspension, turns out the locking ring hadnt been done up and the strut was slowly unscrewing itself. problem solved! also reset the rear height, gave the springs some preload, so much better now. gotta do the fronts next.

i think the front knock is actually a groan and its the new poly bushes are not greased up enough :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...