Jump to content
SAU Community

Recommended Posts

Then I have to ask the obvious question... Why are you running one?

I have plans to track mine, and at nearly 3 times the stock power I was a little worried. Now I have the sandwich plate fitted with temp and pressure sensors, I can see stable temps on the road but give it a squirt and they shoot up.

Because our car was not really designed as a ..... Track bitch......more of a family cruiser.....had they done a sports version of the m35 like the 260rs.......well we have all seen the 380rs haven't we!!!

Lol. Well I worked out my two choices, the Stillen and Nismo, would both be about the same, so I went to order the cheaper one (Stillen) only to get reamed on freight. So ordering the Nismo in the morning.

Cheers for the advice Craig! :thumbsup:

got my car tuned and made an appallingly low 306hp on 14psi, thanks hypergear for ripping me off.

306hp @ 14psi?

Is that AWD HP too (include losses)? Through an automatic (more losses)?

I'd say that's F&*ken awesome!

It's like 400HP at the motor!

If the AFR's are sweet and within limits, and the torque curve is flat what are you complaining about?

I'm saying that is maximum boost. The turbo has a spike to 20 then fall back to 14psi.

Any ideas as to why the turbo is dropping boost? I mean apart from the turbo is crap. I had a similar problem, turned out to be the cat was too restrictive and choking the exhaust flow.

306hp is a good result for 14psi though.

I'm happy with the figure, it's back to stock power. But considering I bought a turbo rated to 375hp I'm unhappy with the result. I'm wondering if it's a wastegate issue now.

Stock is more like 200hp/150kw. So you've got a descent increase over that.

If you can get the boost control issue sorted I think you'll be happy. Most larger aftermarket turbos don't come into their own until up around the 20psi area.

Started changing the dump pipe on the M35 this arvo, bloody hard to get into the top studs. 2 bloody studs snapped rant.gif

Rang Nissan and NO studs in the country, ex japan for bout $125 for set of 5 studs with nuts. I was hoping the rb25 studs would be the same but they said they are a different part number.

Does anyone know if a stud is available from anywhere else? Im getting Captain Thread to go to my mates workshop, where the car is stuck on the hoist for the weekend, to remove the busted studs monday arvo.

lilcrash - hypergear turbos are meant for peak power at over 19psi. I suggest fitting a heavy duty actuator that is rated to 'round 17psi (garret, gcg, or talk to stao and haggle for his HD turbo actuator. Slight retune after fitting & the 20psi boost spike will only taper off a couple psi. You'll gain another 50rwhp I believe.

I went from a 1bar HKS on the gt3076 to a 18psi garret actuator and came away with a decent 20kw increase. You want an actuator rated as close as possible to the boost you wish to run.

Heavy duty actuator rated around 17-19psi will unlock the turbos TRUE power potential.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...