Jump to content
SAU Community

Recommended Posts

Only one way to find out I guess but no more obvious than a Power fc hand controller and cops up here most likely wouldn't know what a boost controller looks like. Haven't ever heard of anyone getting defected for having one either :-/ they usually only check what's under the bonnet

Got a quick road tune in before the Subaru dyno day on Saturday, Cihan isnt very happy tuning the Emanage at 30psi, I guess I will just have to see how it goes. >_<

Craig, is that engine on its way yet? :unsure:

Got a quick road tune in before the Subaru dyno day on Saturday, Cihan isnt very happy tuning the Emanage at 30psi, I guess I will just have to see how it goes. >_<

Craig, is that engine on its way yet? :unsure:

is that still on the unopened 25 scott?

Yep, lol.

It doesnt seem to want to die, its had a hard life the last two years...

lol, any idea if the VQ will run into any issues with the high pressure? i've had a few cooler pipes pop off at 22psi, no big deal, but i'd start getting worried at 30psi on my unopened RB lol.

keen to see the results, thats with the GTX?

Yeh, GTX3071 with 1.06 rear, 45mm external.

Ive had plenty of cooler pipes blow off, I had to modify the throttle body due to the silicone not staying put. All my piping seems fine for now. The bonnet heat guard is shreaded from the air pressure when it lets go. Haha.

The VQ25 runs lower compression, 8.5:1, so I have that on my side. The ethanol has saved my ass though, there is over 6L per minute pumping in, cooling the pistons (hopefully). Its running 10:1 AFR's on boost and he took another degree out just to be sure. Theres at least another 20kw to be made there but we both want the standalone ecu in before its pushed further. Hopefully soon. :cheers:

Got a quick road tune in before the Subaru dyno day on Saturday, Cihan isnt very happy tuning the Emanage at 30psi, I guess I will just have to see how it goes. >_<

Craig, is that engine on its way yet? :unsure:

At the farm at the moment....should finish strapping it for tuesday/ wednesday next week.

Pretty happy with today.

Serviced the Stag, with a new HKS oil filter, Greddy magnetic drain plug and Motul 300v. Have to say the Valvoline came out perfect, as expected. Same gold colour but full of black, if that makes any sense. Got enough Motul for another change now, so I'll see how it goes before I decide if I should change back to the free oil. No difference that I can notice so far.

Started with the upgrades too. Just the front axle for now.

BCs went in, after some adjustment (5cm too short out of the box? WTF?). Followed Dales measurements, and added a bit to get it a bit higher. Feels very stiff but it is also would out to hard from the factory.

DBA 4000 Clubspec rotors and QFM HPX pads went in. So far still bedding in, so dont feel much of a difference yet.

Next week rear BCs, toe arms and brakes go in, then I'll change the lines over to the braided Stoptech lines (which look easy to fit) and refill the brakes with the Motul RBF600.

I have a feeling this car lead a good life in Japan. It seems to have been well maintained, and pulling the pads out today showed half used Nissan pads. I have a feeling it was serviced and driven normally in Japan, no thrashing, which is good!

But they might have been neglected by the previous owners. I think Aaron's was a bit like that.

nope mine was fine. i just had a leak from the oring behind the filter sandwich plate. its good that it was the only leak I ever had..

nope mine was fine. i just had a leak from the oring behind the filter sandwich plate. its good that it was the only leak I ever had..

I think the reference was to some probs you had that could be attributed to less than ideal maintenance before you owned it.

Correct me if I'm wrong, but things like banjo bolt blocked (first turbo failure?) and the sludge you found when you pulled your oil filter/associated mounting hardware off. Chances are a few oil changes might have been missed pinch.gif .

Yesterday I swapped out the painfully noisy Project Mu pads for a set of QFM A1RM on the front of my C34.

The Project Mu pads went straight into my mate's WRX (I have R33 Gts-t brakes)... should be interesting to see if they are as noisy on his car.

nope mine was fine. i just had a leak from the oring behind the filter sandwich plate. its good that it was the only leak I ever had..

What about your tranny? Or was that your own doing? RVO said it was pretty trashed...LOL :whistling:

What about your tranny? Or was that your own doing? RVO said it was pretty trashed...LOL :whistling:

What the hell is he doing trashing his tranny? Is that what the young kids are calling it now?whistling.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...